- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 701
Section05ELECTRICALSYSTEM
Subsection 05 (ACCESSORIES AND LIGHTING SYSTEM)
Continuity Test
Remove the relay from vehicle.
Using the multimeter FLUKE 111 (P/N 529 035
868), select the beeper position.
A33E1JA
Position the RED probe on the terminal 30 and the
BLACK probe on the terminal 87a.
A33E1KA
1
2
1. Terminal 30
2. Terminal 87a
A continuous signal should be audible. If not, re-
place the relay.
If a signal is audible, apply 12 volts on terminals
85and86thenplacetheREDprobeonterminal
30 and the BLACK on the terminal 87.
A33E1LA
1
3
2
4
1. Terminal 30
2. Terminal 87
3. Terminal 85
4. Terminal 86
The continuous signal should be audible. If not,
replace the relay.
SPEEDOMETER
Removal
Insert a little flat screwdriver into the slot at the
bottom of the speedometer. Slightly, pry the
speedometer and turn it clockwise then remove
it from accessories panel.
Unplug connector.
Test
No Lights and the Needle Does Not Move
Remove the speedometer. Apply 12 volts be-
tween pin 8 and pin 11. Place the positive probe
onpin8andthenegativeonpin11.
NOTE: Respect positive and negative positions if
not the speedometer could be damaged.
A35E02A
8 11
If the speedometer stays off, change it.
If the speedometer is lighted, check connector
and wiring harness. Repair defective parts.
182 mmr2005-130
Ваш отзыв будет первым