- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 326
Section07ELECTRICALSYSTEM
Subsection 04 (ACCESSORIES)
HEATING ELEMENTS
NOTE: All measurements must be performed at
21°C(70°F).
Throttle Lever Heating Element
Current Measurement
HIGH
INTENSITY
BROWN wire
0.23 A
minimum
LOW
INTENSITY
BROWN/YELLOW wire
0.13 A
minimum
Handlebar Grip Heating Element
Resistance Measurement
All Models except SDI
INTENSITY WIRES OHMS
HIGH
BLACK and
ORANGE/VIOLET
13.7 to 16.7*
LOW
BLACK and
ORANGE
6.8to8.4*
SDI Models
INTENSITY WIRES OHMS
HIGH
BLACK and
ORANGE/VIOLET
17 to 23.5*
LOW
BLACK and
ORANGE
8.5 to 11.8*
*When measuring resistance at terminals the ac-
tual value will be half the measurement in table.
The reason for that is the elements are connect-
ed in parallel. Therefore the total resistance is half
the resistance of one element.
If the heating elements are good, check connec-
tors and wiring harness.
RELAY
Voltage Test
RELAY
TEST Coil Contact
WIRE
COLOR
WHITE/GREEN
and BLACK
BLACK/YELLOW
and BLACK
RESISTANCE
— —
VOLTAGE 10.5 to 13.5 Vdc 00.0 to 0.10 Vdc
NOTE
Engine idling
(1500 to 1600 RPM)
Engine idling
(1500 to 1600 RPM)
Continuity Test
Remove the relay from vehicle.
Using the multimeter FLUKE 111 (P/N 529 035
868), select the beeper position.
A33E1JA
Position the RED probe on the terminal 30 and the
BLACK probe on the terminal 87a.
A33E1KA
1
2
1. Terminal 30
2. Terminal 87a
312 mmr2005-085
Ваш отзыв будет первым