- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 1104
Section 04 ENGINE (4-TEC)
Subsection 06 (CRANKSHAFT/DRIVE GEARS)
A
R1004motr12A
A. Piston pin diameter in the area of the bushing
CONNECTING ROD SMALL END DIAMETER
NEW MINIMUM
23.01 mm (.9059 in)
NEW MAXIMUM 23.02 mm (.9063 in)
SERVICE LIMIT 23.07 mm (.908 in)
PISTON PIN DIAMETER
NEW MINIMUM 22.996 mm (.9053 in)
NEW MAXIMUM
23.000 mm (.9055 in)
SERVICE LIMIT 22.990 mm (.904 in)
PISTON PIN BORE CLEARANCE
SERVICE LIMIT
0.080 mm (.0035 in)
NOTE: If the connecting rod small end diameter is
out of specification, replace connecting rod.
Connecting Rod Big End Radial Play
Remove connecting rod no. 2 from crankshaft
no. 1.
CAUTION: Always replace connecting rod
screws no. 4 if removing the connecting rod.
It is recommended to replace bushings no. 3,
in case of installing the connecting rod.
1
R1004motr13A
1. Connecting rod screw
Measure crankpin. Compare to inside diameter of
connecting rod big end.
1
R1004motr14A
2
1. Micrometer
2. Crankpin area for bushings
To measure the connecting rod big end diameter,
use the OLD screws no. 4.
Install the OLD bushings no. 3 as they were
mounted initially.
Do the torque procedure as described further.
R1004motr15A
A
A. Connecting rod big end bushing
CRANKSHAFT PIN DIAMETER
NEW MINIMUM
45.017 mm (1.7723 in)
NEW MAXIMUM
45.033 mm (1.7729 in)
SERVICE LIMIT
45.000 mm (1.772 in)
CONNECTING ROD BIG END DIAMETER
SERVICE LIMIT
45.090 mm (1.775 in)
CONNECTING ROD BIG END CLEARANCE
SERVICE LIMIT
0.09 mm (.0035 in)
238 mmr2005-026
Ваш отзыв будет первым