- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 1276
Section 07 TRANSMISSION
Subsection 07 (GEARBOX)
Install lower shaft no. 36 with its hollow side (no
splines) on RH side. Align key with lower gear
no. 34 keyway.
A29D1GA
Apply synthetic grease (P/N 413 711 500) on inter-
mediate shaft no. 30 O-rings.
Install intermediate gears no. 29 with their shoul-
der towards LH side. Position spacers no. 28 as
illustrated in removal procedure. Beveled side of
spacers goes against gearbox wall.
Install new caps no. 40.
Install the appropriate premarked shims no. 10.
Using a pusher, install RH side bearing of brake
and reverse shafts.
A29D35A
1
1. Bearings installed
Partially assemble brake shaft gears no. 24 and
no. 25 with shoulder facing recess.
A29D1IA
1
2
1. Shoulder
2. Recess
Install sleeve no. 23 on brake shaft no. 26 then,
slide gears and sleeve until end of sleeve is flush
with shaft end.
A29D1JA
1
1. Flush
Install brake shaft no. 26 into gearbox then, loose-
ly install gear no. 22 with its shoulder facing bear-
ing no. 21. Do not push brake shaft into bearing
no. 21 at this time.
mmr2005-040 415
Ваш отзыв будет первым