- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 1206
Section 07 TRANSMISSION
Subsection 01 (DRIVE BELT)
Check the drive belt width. Replace the drive belt
if width is less than the minimum width recom-
mended (see table above).
ROTATION DIRECTION
The maximum drive belt life span is obtained
when the drive belt is installed as shown. This
will ensure that correct direction of rotation is
respected.
A01D2KA
CORRECT
A01D2LA
INCORRECT
NOTE: For used drive belt, mark and reinstall in
the same position.
DRIVE BELT HEIGHT
MEASUREMENT AND
ADJUSTMENT
NOTE: The drive belt height measurement and
adjustment must be performed each time a new
drive belt is installed.
Measurement
Before checking the belt height, ensure that a
good-condition proper belt (refer to the APPLICA-
TION CHART) is installed.
Adjust pulley distance and alignment. Refer to
PULLEY DISTANCE AND ALIGNMENT.
To obtain maximum vehicle performance, the belt
height must be adjusted according to specifica-
tions shown in the accompanying chart.
MODEL
BELT HEIGHT
mm (in)
All models
Top edge of drive belt cord should
be flush with driven pulley edge
1
A02D1UA
1. Flush
Models Equipped with Formula VSA
Type Driven Pulley
Adjust drive belt height using Allen screws, as
shown.
To lower belt in driven pulley: turn Allen screws
clockwise.
To raise belt in driven pulley: turn Allen screws
counterclockwise.
342 mmr2005-034
Ваш отзыв будет первым