- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 1237
Section 07 TRANSMISSION
Subsection 03 (DRIVEN PULLEY)
A05D12A
1
1. Adjusting hole
Insert other spring end in cam. Mount driven pul-
ley spring compressor (P/N 529 035 300) as in DIS-
ASSEMBLY procedure.
Push cam all the way in then install roll pin coated
with anti-seize lubricant (P/N 413 701 000).
13,14,15, Fixed Pulley Half, Brake
Disc and Screw
Install brake disc on fixed pulley half and torque
screwsto15N•m(133lbf•in).
INSTALLATION
Follow INSTALLATION procedure for Tundra driv-
en pulley at beginning of this subsection.
ADJUSTMENT
11,12, Shim
NOTE: The following adjustment must be per-
formed with a new drive belt.
For best performance, particularly at starting, top
of drive belt should be flush with top of driven
pulley halves.
A07E0CA
1
TYPICAL
1. Belt flush with the top of the pulley halves
Shim(s) no. 11 and no. 12 provide belt height ad-
justment between pulley halves. Adding shims
will lower the belt in driven pulley, while remov-
ing shims will raise the belt. Adjust properly.
Pulley Alignment and Drive Belt
Deflection
Refer to PULLEY DISTANCE AND ALIGNMENT
and DRIVE BELT to perform adjustments.
CAUTION: Drive belt and pulley adjustments
must always be checked whenever pulleys
have been removed, replaced or disassem-
bled.
mmr2005-036 373
Ваш отзыв будет первым