- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 1401
Section11BODY/FRAME
Subsection 02 (FRAME)
FRAME
FRAME CLEANING
NOTE: For bare aluminum frames use only alu-
minum cleaner and follow instructions on contain-
er. (Dursol cleaner or equivalent).
Clean frame and tunnel with appropriate cleaners
and rinse with high pressure hose.
CAUTION: Never direct high-pressure water jet
towards decals. They would peel off.
Touch up all metal spots where paint has been
scratched off. Spray all bare metal parts of vehicle
with metal protector.
Seat Cleaning
For all models, it is recommended to clean the
seat with a solution of warm soapy water, using
a soft clean cloth.
CAUTION: Avoid use of harsh detergents such
as strong soaps, degreasing solvents, abrasive
cleaners, paint thinners, etc. that may cause
damage to the seat cover.
FRAME WELDING
Steel Frame:
– electric welding
– amperage: 70-110 A
– voltage: 20-24 V
– electrode: E-7014 (3/32 in).
CAUTION: Before performing electrical weld-
ing anywhere on the vehicle, unplug the multi-
ple connector at the electronic box. On models
equipped with a battery, also unplug the nega-
tive cable. This will protect the electronic box
and battery against damage caused by flowing
current when welding.
A03C18B
1
TYPICAL — FAN COOLED MODELS
1. Unplug before electrical welding
A32E0WB
TYPICAL — LIQUID COOLED MODELS MPEM UNPLUGGED
CAUTION: If welding is to be done near plastic
material, it is recommended to either remove
the part from the area or to protect it with alu-
minum foil to prevent damage.
mmr2005-056 547
Ваш отзыв будет первым