- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 1146
Section 05 ENGINE MANAGEMENT (2-TEC)
Subsection 03 (COMPONENT INSPECTION AND ADJUSTMENT)
1
A32I14A
1. Arrows
Install a torque wrench perpendicularly (90°)tofu-
el pump nut wrench (P/N 529 035 899). Torque
fuel pump nut to 30 N•m(22lbf•ft).
A32I1BA
2
A
1
1. Arrows
2. Torque wrench
A. 90°
Bleed the fuel system as following procedure.
Fuel Bleeding Procedure
The rear fuel pickup hose has to be bled.
Pour 12 L (3.17 U.S. gal.) of recommended fuel in
the fuel tank.
Apply parking brake. Start the engine. Let it run
at idle speed.
Lift the front of vehicle at a 45° angle.
Put the vehicle back on the ground.
Do the above procedure three times.
Stop the engine. The rear fuel pickup hose is now
bled.
Fuel Hose Kit
Remove fuel pump module as explained above.
Unfasten blue hose clamp retaining old fuel hose
ass’y to pump inlet nipple. Remove old fuel hose
ass’y.
Install fuel hose ass’ytopumpatanangleof46±
3° from retaining rods axis.
1
A32I0VA
2
A
1. Retaining rods axis
2. Fuel hose ass’y
A. 30° ±3
Install a new blue hose clamp on fuel hose ass’y.
Install a new gasket, then reinstall fuel pump mod-
ule as explained above.
Pump Ass’yKit
Remove fuel pump module as explained above.
Disconnect fuel hose from pump inlet nipple.
Disconnect pump electric connector.
Disconnect pump outlet hose from pump module
flange nipple.
Remove E-clips. Slide pump ass’y out of retaining
rods.
mmr2005-029 281
Ваш отзыв будет первым