- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 121
Section 03 ENGINES
Subsection 05 (TOP END)
Cylinder Head Cover
All Engines Except 793 HO
Unplug spark plug cables.
Disconnect the knock sensor no. 19 (593 HO SDI
engine).
Unplug coolant hose from upper thermostat hous-
ing no. 20.
Unscrew all cylinder head cover screws no. 21.
Cylinder Head
All Engines except 793 HO
Remove the cylinder head cover no. 1 as ex-
plained above.
Disconnect the temperature sensor connector.
Remove the cylinder head no. 2.
793 HO Engines
Unplug spark plug cables.
Disconnect the knock sensor no. 19 (793 HO Pow-
er Tek engine).
Disconnect the temperature sensor connector.
Unplug coolant hose from upper thermostat hous-
ing no. 20.
Unscrew all cylinder head screws no. 21.
Remove the cylinder head no. 2.
Cylinder
593 HO SDI Engine
Release the fuel pressure of the system.
Unplug fuel injector connectors then remove the
fuel rail no. 24. Refer to COMPONENT INSPEC-
TION, REPLACEMENT AND ADJUSTMENT.
All Engines
Remove cylinder head no. 2 as explained above.
Remove manifold and RAVE valves.
Unscrew cylinder screws no. 22 and no. 23 then
remove the cylinder(s) no. 3.
Piston
Place a clean cloth or rubber pad (P/N 529 023 400)
over crankcase. Then with a pointed tool inserted
in piston notch, remove both circlips no. 25 from
piston no. 26.
A02C29A
TYPICAL
NOTE: All engines are equipped with cageless pis-
ton pin bearings.
A32C17A
To remove piston no. 26, use the following tools:
ENGINE
PULLER
P/N
SLEEVE KIT
P/N
LOCATING
SLEEVE P/N
All 529 035 503
529 035 542
(20 mm)
529 023 800
NOTE: The locating sleeve is the same that con-
tains new cageless bearing.
Insert piston pin puller making sure it sits squarely
against piston.
mmr2005-072 101
Ваш отзыв будет первым