- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 1340
Section 09 REAR SUSPENSION
Subsection 01 (TORQUE REACTION SUSPENSION)
COMPONENT REMOVAL
Lift rear of vehicle and support it off the ground.
5, Rear Arm
Release track tension.
Release spring tension. Unfasten shock from rear
arm. Remove 3 screws retaining rear arm.
SUSPENSION ASS'Y REMOVAL
Release track tension.
NOTE: To prevent cross shaft from turning when
unscrewing screws assembled with threadlocker,
proceed as follows:
– Loosen one screw then retighten.
– Remove the other screw.
– Remove the first one.
1,2,3,4, Cross Shaft, Idler Wheel,
Spacer and Screw
Remove idler wheel ass'y.
Suspension Ass'y
Lift rear of vehicle and support it off the ground.
Unscrew 4 screws retaining front arm and rear
arm to frame.
Remove suspension.
DISASSEMBLY AND ASSEMBLY
6, Stopper Strap
When assembling make sure it is attached
through the 3
rd
hole from the end. Torque nut to
11 N•m(97lbf•in).
A05F0CA
A
1
2
1. 1
st
hole
2. 3
rd
hole
A. 11 N•m(97lbf•
in)
9,10,11, Nut, Slotted Screw and
Slider Shoe
To replace a worn shoe, remove the front screw
andstopnut,thenslidetheshoerearwardoutof
the runner.
A05F0IC
1
1. Front screw and nut
CAUTION: Slider shoes must always be re-
placed in pairs.
mmr2005-048 483
Ваш отзыв будет первым