- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo SUMMIT 2005, страница 1011
Section 03 ENGINES (2-STROKE)
Subsection 06 (OIL INJECTION SYSTEM)
Loosen the adjuster nut and adjust accordingly.
Retighten the adjuster nut.
A05C0YA
1 2
3
TYPICAL — TUNDRA R
1. Adjuster nuts
2. Bleeder screw
3. Marks
A13C0PA
1
2
3
TYPICAL — SKANDIC LT/WT/SWT/SUV 550
1. Adjuster nut
2. Bleeder screw
3. Marks
CAUTION: Proper oil injection pump adjust-
ment is very important. Any delay in the
opening of the pump can result in serious
engine damage.
593 and 593 HO SDI Engines
Before proceeding with the oil pump cable adjust-
ment, verify throttle cable adjustment and adjust
if needed. Refer to FUEL SYSTEM or COMPO-
NENT INSPECTION AND ADJUSTMENT, noting
that the throttle cable free play should be adjusted
just prior to the oil pump cable.
Depress the throttle lever lightly until the cable is
under tension but carburetors or throttle body are
not yet opened.
NOTE: Throttle cable visible distance “A” is mea-
sured between the throttle lever and the cable
housing end, using a feeler gauge.
Measure the visible distance “A” using the appro-
priate feeler gauge and note measurement.
A33C3QA
1
A
2
3
TYPICAL
1. Feeler gauge
2. Throttle lever
3. Cable housing end
A. Measurement “A”
Next, add to measurement “A” the appropriate
specification “B”, using the chart below.
OIL PUMP ADJUSTMENT
Engine Type Specification “B”
593 16.5 mm (0.650 in)
593 HO SDI
18 mm (0.709 in)
The correct specification for measurement “C” is
the sum of “A” plus the specification “B” found
in the chart.
Stretch oil pump adjustment cable with a 32 N
(7.2 lbf) force and measure the length of its visible
distance “C”.
mmr2005-015 139
Ваш отзыв будет первым