- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo MX Z 2005, страница 1226
Section 07 TRANSMISSION
Subsection 02 (DRIVE PULLEY)
Spring Cover Bushing Replacement
Under normal use there is no need to replace this
bushing.
In case of replacement, it’s recommended to re-
place spring cover ass’y.
ASSEMBLY
NOTE: This drive pulley is lubrication free. Do not
lubricate any component.
1,2,3, Screw, Ring Gear and Loctite 271
Apply Loctite 271 (P/N 293 800 005) on threads
andthentorqueto27N•m(20lbf•ft).
26,27,28, Calibration Screw, Washer
and Locking Nut
When installing calibration screw, make sure to
install washer as shown.
A16D07A
1
TYPICAL
1. Washer
Torque locking nut to 10 N•m(89lbf•in).
15, Pin
Always use the same type of pin as originally in-
stalled when servicing. Different types have dif-
ferent weights for calibration purpose. Refer to
TECHNICAL DATA.
21,22,23, Screw, Dowel Tube and Ramp
Insert dowel tube from chamfered side. Make
sure ramp is centered on dowel tube.
A16D08A
1
1. Chamfered side
Position dowel tube split at the angle A.
A16D2PB
A
MODEL ANGLE (A)
With TRA 30 ± 5°
With TRA III and IV 45 ± 3°
A16D09A
11
1. Equal distance
Torquescrewsto10N•m(89lbf
•in).
362 mmr2005-035
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
0