- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo MX Z 2005, страница 1290
Section 08 ELECTRICAL
Subsection 01 (IGNITION TIMING)
1. CHECK KEYS
2. PROGRAM KEY
>3. VEHICLE INFO
4
START VEH.
+
A30E1XA
Vehicle information is transferred from MPEM to
programmer.
A30E1YA
TRANSFER
PGMR MPEM
NOTE: In fact the programmer takes a copy of all
vehicle parameters scribed in MPEM. This copy
will be modified within the programmer then
transferred to the MPEM.
Select no. 4 ENGINE PARAMETER.
A30E1ZA
+
>4 ENGINE PARAM.
2. DELIVERY DATE
1. CUSTOMER NAME
3. VEH. SERIAL#
Select no. 1 TIMING ADJUSTMENT.
A30E2GA
2. ENGINE SERIAL#
>1. TIMING ADJUST
3. CALIBRATION
Press ENTER.
Now the display shows the engine timing correc-
tion factor that is programmed in the MPEM. In
thefollowingexampletimingcorrectionfactoris
no. 4.
A30E21A
TIMING<1-8>:4
PRESS ANY KEY...
Press any key.
Select YES using the key
A00A3DA
MODIFY?
YES NO
Press ENTER.
A30E23A
TIMING<1-8>:TIMING<1-8>:
Select a timing correction factor corresponding to
correction needed.
Example: Timing mark as verified with a timing
light at 3500 RPM was too early by 2°.Thecor-
rection factor programmed is no. 4.
Select correction factor no. 5. This will retard the
timing by 2° because the difference between cor-
rection factor no. 4 and no. 5 is - 2° (passing from
1° to - 1°).
mmr2005-042 429
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
0