- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo MX Z 2005, страница 715
Section 06 DRIVE SYSTEM
Subsection 02 (DRIVE PULLEY)
Torque ring gear screws.
CAUTION: Do not use other screws than rec-
ommended ones in the parts catalog. Never
use bolts coming from another type of pulley.
RING GEAR ON TRA V
ENGINE TORQUE
All 995 SDI
53 N•m(39lbf•ft)
Calibration Screw, Washer and
Locking Nut
When installing calibration screw no. 22, make
sure to install washer no. 23 as shown.
A16D07A
1
TYPICAL
1. Washer
The calibration screws should be installed at the
following position.
CALIBRATION SCREW POSITION
MODEL ENGINE POSITION
Mach Z
995 SDI
6
Summit
(Canada and U.S.A.)
995 SDI
4
Summit
(Europe)
995 SDI
3
Torque locking nut no. 24 to 10 N•m(89lbf•in).
Pin
Always use the same type of pin no. 25 as original-
ly installed when servicing. Different types have
different weights for calibration purpose. Refer to
TECHNICAL DATA.
Use a heat gun for pin removal.
Apply Loctite 609 (P/N 413 703 100) between pin
and lever when assembling.
Dowel Tube and Ramp
Insert dowel tube no. 26 from chamfered side.
Make sure ramp no. 27 is centered on dowel tube.
A16D08A
1
1. Chamfered side
Position dowel tube split at the angle A.
A35D0WA
A
MODEL ANGLE (A)
With TRA V 45 ± 3°
A16D09A
11
1. Equal distance
Torque screws no. 28 to 10 N•m(89lbf•in).
196 mmr2005-132
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
0