- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo MX Z 2005, страница 1262
Section 07 TRANSMISSION
Subsection 06 (CHAINCASE)
A01D0FA
1
23
1. Toward chaincase
2. Oil deflector
3. Bearing
1, Oil Seal
Using an appropriate pusher, press new oil seal
no. 7 into chaincase hub. Oil seal must sit flush
with case hub edge.
INSTALLATION
Reverse removal procedure. Pay particular atten-
tion to the following:
Torque castellated nut 14 to 14 N•m (124 lbf•in),
loosen then retorque to 0.5 - 2.5 N•m
(5 - 22 lbf•in).
Apply Loctite 20166 (P/N 293 800 066) around
both threaded holes of cover screws.
Grease new gasket no. 19 with petroleum jelly, or
other suitable product, and install it making sure
it does not shift from its correct position. Tighten
bolts evenly.
NOTE: Bottom pan has an emboss below chain-
case housing to ease installation.
Chaincase Oil
Remove filler cap and pour 250 mL (8.5 fl. oz) of
XP-S mineral chaincase oil (P/N 413 801 900) into
chaincase.
NOTE: Chaincase oil capacity is 250 mL (8.5 fl. oz).
Check the oil level by removing the chaincase oil
level plug.
1
2
A03D02A
1. Filler cap
2. Oil level plug
The oil should be leveled with the bottom of the
oil level orifice.
Reinstall battery and connect cables on electric
starting models.
CAUTION: Always connect positive RED cable
first to prevent sparks.
ADJUSTMENT
Pulley Alignment
RefertoPULLEYDISTANCEANDALIGNMENT.
Track Tension and Alignment
Refer to TRACK.
400 mmr2005-039
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
0