Просмотр инструкции снегоходы Ski Doo MX Z 2005, страница 132
Section 03 ENGINES
Subsection 06 (BOTTOM END)
Remove engine from chassis. Refer to REMOVAL
AND INSTALLATION.
Remove engine fan cowls, cylinder heads and
cylinders. Refer to TOP END.
Remove rewind starter. Refer to REWIND
STARTER.
Remove fan belt pulley, trigger coils, magneto fly-
wheel and stator plate. Refer to MAGNETO SYS-
TEM.
CLEANING
Discard all seals, gaskets and O-rings.
Clean all metal components in a non-ferrous met-
al cleaner. Use Loctite Chisel (P/N 413 708 500)
accordingly.
Remove all trace of Loctite 243 from crankshaft
taper.
Remove old sealant from crankcase mating sur-
faces with Loctite Chisel.
CAUTION: Never use a sharp object to scrape
away old sealant as score marks incurred are
detrimental to crankcase sealing.
DISASSEMBLY
To remove PTO side bearings no. 3 from crank-
shaft, install half rings (P/N 420 977 475) and puller
ring (P/N 420 977 490) on the bearing.
A32CB0A
2
1
1. Half ring
2. Puller ring
Apply synthetic grease (P/N 413 711 500) on the
crankshaft end and install crankshaft protector
(P/N 420 876 552).
A32CB1A
1
1. Crankshaft protector
Install bearing puller (P/N 420 877 635) and secure
to half rings using screws (P/N 420 840 681).
A32CB2A
PULLER INSTALLED ON THE HALF RINGS
Secure the bearing puller in a vise by one of its rib.
112 mmr2005-073
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
Сортировать:
по дате
c ответами
виктор
06 января 2022, Курганская
здраствуйте мануал на mxz 440 2005 год
Анатолий Миронов
04 декабря 2020, Зеленоград
здравствуй те! если есть мануал на русском для снегохода ски-дуMZX583 1997г.в. то было бы здорово если вы мне на почту прислали. Спасибо!