- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo MX Z 2005, страница 127
Section 03 ENGINES
Subsection 05 (TOP END)
CAUTION: Always install new mono-hook cir-
clips. If circlip installation fails at the first at-
tempt, always retry with a new one because,
on a second attempt, the circlip will lose its nor-
mal retaining capabilities.
CAUTION: Circlips must not move freely after
installation; if so, replace them.
Before inserting piston in cylinder, lubricate the
cylinder with new injection oil or equivalent.
Cylinder Head Cover, Cylinder Head
and Cylinder
Apply a thin layer of Loctite 518 (P/N 293 800
038) to crankcase mating surface of base gasket.
Choose the right gasket thickness according to
combustion chamber volume. Refer to ENGINE
MEASUREMENT. Install it on crankcase. Coat
gasket with Loctite 518.
CAUTION: Always install a gasket of the proper
thickness. Failure to do so may cause detona-
tion and severe engine damage.
Before inserting piston in cylinder, lubricate the
cylinder with new injection oil or equivalent.
Install cylinders. Do not tighten.
Install new rubber ring and round O-rings on each
cylinder.
NOTE: Carefully clean screws before reinstalla-
tion, specifically under screw head.
Install exhaust manifold with gaskets. Do not
tighten yet.
Torque cylinder screws in a crisscross sequence
as per the following table.
M8 29 N•m(21lbf•ft)
M10 40 N•m(29lbf•ft)
At assembly, torque cylinder head screws to
29 N•m(21lbf•ft) in the following illustrated
sequence.
6
A32C9EA
4 2
8
12
10
11 9
1
3
5 7
TYPICAL
Tighten exhaust manifold bolts in a criss-cross se-
quence.
Apply Loctite 243 (P/N 293 800 060) on screw
threads. Install outlet socket and tighten screws.
Note position of longer screw.
1
A32C19A
1. Longer screw
Reed Valve
Blades have a curved shape. Install with their
curve facing reed block.
Check reed valve for proper tightness. There
must not be any play between blade and valve
body when exerting a finger pressure on blade at
blade stopper location.
In case of a play, turn blade upside down and
recheck. If there is still a play, replace blade and/or
valve body.
mmr2005-072 107
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
0