- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo MX Z 2005, страница 1186
Section 06 ENGINE MANAGEMENT (4-TEC)
Subsection 03 (COMPONENT INSPECTION AND ADJUSTMENT)
A32I13A
TYPICAL
Installation
For installation, reverse the removal process but
pay attention to the following.
Install a new gasket.
Make sure that rear pickup hose is positioned as
following illustration.
A32I1AA
Align the arrow on fuel pump module with the
one on fuel tank. Keep arrows aligned during fuel
pump module nut tightening.
Install a torque wrench perpendicularly (90°)tofu-
el pump nut fuel pump wrench (P/N 529 035 899).
Torque fuel pump nut to 30 N•m(22lbf•ft).
A32I1BA
2
A
1
1. Arrows aligned
2. Torque wrench
A. 90°
Bleed the fuel system as per following procedure.
Fuel Bleeding Procedure
The rear fuel pickup hose has to be bled.
Pour 12 L (3.17 U.S. gal.) of recommended fuel in
the fuel tank.
Apply parking brake. Start the engine. Let it run
at idle speed.
Lift the front of vehicle at a 45° angle.
Put the vehicle back on the ground.
Repeat the operation twice.
Stop the engine. The rear fuel pickup hose is now
bled.
Fuel Hose Kit
Remove fuel pump module as explained above.
Unfasten blue hose clamp retaining old fuel hose
ass’y to pump inlet nipple. Remove old fuel hose
ass’y.
Install fuel hose ass’ytopumpatanangleof30±
3° from retaining rods axis.
322 mmr2005-032
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
0