- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo MX Z 2005, страница 906
Section 02 TROUBLESHOOTING GUIDE
Subsection 04 (TRANSMISSION AND BRAKE SYSTEMS)
Symptom: LOOSENESS IS FELT IN DRIVE SYSTEM WHEN ACCELERATING/DECELERAT-
ING.
1. Check drive chain tension.
- Drive chain is too loose. Adjust.
2. Check radial play of driven pulley.
- Worn key, keyway or splines. Replace.
Symptom: VIBRATIONS ORIGINATING FROM DRIVE PULLEY.
1. Check drive belt.
- Belt width is uneven at many places. Replace.
2. Check tightening torque of drive pulley screw.
- Moving governor cup. Retighten screw.
3. Spring cover screws.
- Spring cover moves and restrains sliding half movement. Retighten screws.
4. Check spring cover (TRA TYPE) and/or sliding half bushings.
- Excessive gap between bushings and fixed half shaft, thus restraining sliding half movements.
Replace bushing(s).
5. Check governor cup splines.
- Excessive radial play. Replace governor cup.
6. Check lever assembly.
- Lever assembly is damaged (worn bushing, bent lever, etc.). Replace damaged part.
Symptom: VIBRATIONS ORIGINATING FROM DRIVEN PULLEY.
1. Check sliding half side play.
- Sliding half bushing worn out. Replace sliding half bushing.
2. Check sliding half and fixed half straightness.
- Sliding half/fixed half warped. Replace.
3. Check cam slider shoes.
- One or two slider shoes out of three are broken. Replace.
Symptom: PULLEYS DO NOT DOWN SHIFT PROPERLY.
1. Check driven pulley spring tension.
- Spring tension is too low. Adjust according to specifications (refer to TECHNICAL DATA).
2. Refer to VIBRATIONS COMING FROM DRIVEN PULLEY and check items listed.
3. Check drive pulley bushings (cleanliness, wear, etc.).
- Bushings stick to fixed half pulley shaft. Clean or replace.
30 mmr2005-007
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
0