- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo MX Z 2005, страница 1217
Section 07 TRANSMISSION
Subsection 02 (DRIVE PULLEY)
1
A29D26A
1. Spider wrench
Note shim no. 8 quantity.
1
A29D27A
1. Shims
Remove cam arms no. 12.
CLEANING
Clean pulley faces and shaft with fine steel wool
and clean dry cloth. Clean sliding half bushing
no. 9 and cover bushing with clean dry cloth.
Thoroughly clean spider threads and fixed half
post threads.
INSPECTION
Check sliding half for excessive lateral play and
fixed half post for scratches. Replace as required.
Check cover bushing interior. Replace cover if
bushing is completely bronze instead of the origi-
nal teflon coating.
Check spider thrust buttons no. 6 for proper slid-
ing action. Replace as required.
Check rollers no. 7 for free action. Replace as
required.
ASSEMBLY
Install shims no. 8 on fixed half post.
Apply Primer N (P/N 293 800 041) to both post and
spider threads, allow to dry for 10 minutes. Apply
Loctite 271 (P/N 293 800 005) to threads.
Using spider wrench (P/N 529 025 400) from tool
kit, torque spider to 5 to 170 N•m(125lbf•ft).
With square end facing sliding half, install a wash-
er no. 13 on each side of cam arm no. 12.
1
A29D28A
1. Square end facing sliding half
Tighten to 5.6 N•m(50lbf•in) maximum all three
pivot nuts no. 15. Make sure cam arms no. 12
can still move on their pivot bolts no. 11.
mmr2005-035 353
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
0