Просмотр инструкции снегоходы Ski Doo MX Z 2005, страница 1154
Section 05 ENGINE MANAGEMENT (2-TEC)
Subsection 03 (COMPONENT INSPECTION AND ADJUSTMENT)
R1503motr182A
5
19
Using a multimeter, recheck resistance value be-
tween terminals 5 and 19.
If resistance value is correct, try a new ECM. Refer
to ECM REPLACEMENT procedures elsewhere in
this section.
If resistance value is incorrect, repair the connec-
tors or replace the wiring harness between ECM
connector and the CPS.
Replacement
Disconnect connectors and remove the rewind
starter, then the magneto flywheel. Refer to
MAGNETO SYSTEM.
Remove CPS.
1
A32C9VA
1. CPS inside crankcase
When installing new CPS apply Loctite 5910
(P/N 293 800 081) between CPS and crankcase.
Torque to 8 N•m(71lbf•in).
Reinstall remaining removed parts.
AIR TEMPERATURE SENSOR
(ATS)
1
A32CA3A
1. Air temperature sensor (ATS)
Resistance Test
Disconnect the plug connector from the ATS and
check the resistance of the sensor itself.
Refer to TEMPERATURE SENSOR TABLE at the
beginning of this section to find the corresponding
resistance value for this sensor temperature.
If out of specification, replace the sensor.
If resistance tests good, reconnect the ATS and
disconnect the connector A on the ECM.
R1503motr186A
7
21
Using a multimeter, recheck resistance value be-
tween terminals 7 and 21.
If resistance value is correct, try a new ECM. Refer
to ECM REPLACEMENT procedures elsewhere in
this section.
mmr2005-029 289
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
Сортировать:
по дате
c ответами
виктор
06 января 2022, Курганская
здраствуйте мануал на mxz 440 2005 год
Анатолий Миронов
04 декабря 2020, Зеленоград
здравствуй те! если есть мануал на русском для снегохода ски-дуMZX583 1997г.в. то было бы здорово если вы мне на почту прислали. Спасибо!