- Тип техники
- Бренд
Просмотр инструкции снегоходы Ski Doo MX Z 2005, страница 1043
Section 03 ENGINES (2-STROKE)
Subsection 10 (FUEL SYSTEM)
A01C5IA
1
2
1. Choke cable adjustment nut
2. Choke plunger tool
Tighten choke cable lock nut and reinstall protector
cap.
Set choke lever to close and open positions and
ensure that tool properly seats under plunger only
when lever is set to fully open position.
Set choke lever to close position and, by pulling
and pushing choke lever, make sure there is no
tension on cable (free play).
A01C5JA
CHOKE LEVER — CLOSED POSITION
FUEL PUMP
REMOVAL
Install a hose pincher (P/N 295 000 076) on fuel
supply line close to pump inlet.
A01B2JA
295 000 076
Disconnect fuel outlet line(s).
Disconnect impulse line.
Remove screws securing fuel pump.
PUMP VERIFICATION
Check fuel pump valves operation as follows:
Connect a clean plastic tubing to the inlet nipple
and alternately apply pressure and vacuum with
pump of leak test kit. The inlet valve should re-
lease with pressure and hold under vacuum.
Repeat the same procedure at the outlet nipple.
This time the outlet valve should hold with pres-
sure and release under vacuum.
NOTE: On model fitted with 2 outlets, plug 1 out-
let with finger while checking outlet valve.
To check impulse diaphragm and gasket on high-
supply fuel pump equipped with twin outlets, pro-
ceed as follows:
Connect a clean plastic tubing to the impulse nip-
ple and plug vent hole on top cover. Either apply
pressure or vacuum using the vacuum/pressure
pump kit (P/N 529 021 800). The diaphragm/gas-
ket must not leak.
CLEANING AND INSPECTION
The entire pump should be cleaned with general
purpose solvent before disassembly.
172 mmr2005-019
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
0