- Тип техники
- Бренд
Просмотр инструкции мультиварки Vitek VT-4222 BK, страница 9
9
E N G L I S H
General example of rice loading
Measure rice with the measuring cup (24), wash
it and put into a casserole.
The water level required for a certain amount of
rice is given on the scale inside the bowl (11):
rice – «RICE», water level in cups – «CUP». Pour
water up to the corresponding mark.
Example: After putting four measuring cups
of cereal, pour water up to the mark «4 CUP»
(cups).
For liquid porridges the recommended propor-
tion of rice and water is 1:3.
1. Put the food into the bowl (11) following the
recipe (see the Recipe book).
2. Place the bowl (11) in the process chamber.
Make sure that the outer surface of the bowl
is clean and dry, and the bowl itself is installed
evenly and is in tight contact with the surface
of the heating element (9).
3. If you steam products, pour water into the
bowl (11) so that boiling water doesn’t reach
the bottom of the basket (21). Put the food
into the basket (21) and place it in the bowl
(11).
4. Close the lid (4) until clicking. If you are cook-
ing in the «Roasting» program, leave the lid
open.
5. Insert the power cord connector into the con-
nection socket (8) and the power cord plug
into the mains socket. You will hear a sound
signal, the «START/STOP» button (14) illumi-
nation will be flashing and the current time will
be shown on the display.
Selecting the program from the upper part
of the menu
6. Press and hold the «MENU» button (15) for
3 seconds, the symbol
(beef) will be flash-
ing.
7. Select the food type using the «+/-» buttons
(17): beef
, lamb , pork , poultry
, seafood or vegetables . The selected
product icon will be flashing.
8. Touch the «MENU» button (15) and then use
the buttons (17) «+/-» to select a cooking
program: «Slow cooking»
, «Boiling» ,
«Steam cooking»
, «Roasting» or
«Stewing»
. The symbol of the selected
program will flash, and the display will
show the duration of the program as set by
default.
9. Go to the chapter “Setting the cooking time”.
Selecting a program from the lower part
of the menu
10. In standby mode (the display is showing cur-
rent time), press the «MENU» button (15). If
the upper part of the menu is active, press
and hold down the «MENU» button (15) for
3 seconds to switch to the lower part of the
menu.
11. To switch to the «Multicook» program quickly,
press the «MULTICOOK» button (19) (the pro-
gram indicator will be flashing).
12. Use the buttons (17) «+/-» to select a cooking
program. The corresponding program name
and the default cooking time will be flashing
on the display.
Setting the cooking time and temperature
Note: This function is not available for «Rice»
program; go to the step “Setting the delayed
start”.
Temperature setting is available in «Pizza»,
«Roasting», «Julienne» and «Multicook» pro-
grams.
13. Touch the «TIME» button (18), the hour digits
will be flashing. Use the «+/-» buttons (17) to
set the cooking time in hours.
14. Touch the «TIME» button (18), the minutes
digits will be flashing. Use the «+/-» buttons
(17) to set the cooking time in minutes.
15. For «Pizza», «Julienne», «Roasting» and
«Multicook» programs: touch the «TIME»
button (18) and set the cooking temperature
using the buttons (17) «+/-».
Setting the delayed start function
Notes:
If you want to start cooking immediately, go to
the step «Switching the cooking mode on».
See the list of programs with available delayed
start function in the table «Cooking programs».
16. Touch the «DELAYED START» button (16), the
indicator
will appear on the display (3)
and the hour digits will be flashing. Use the
«+/-» buttons (17) to set the cooking end time
in hours.
17. Touch the «TIME» button (18), the minutes
digits will be flashing. Use the «+/-» buttons
(17) to set the cooking end time in minutes.
Switching the cooking mode on
18. Touch the «START» button (14). If you set the
delayed start function and switch the unit on,
VT-4222.indd 9 27.08.2014 11:58:51
Ваш отзыв будет первым