- Тип техники
- Бренд
Просмотр инструкции автомагнитолы Hyundai Electronics H-CMD4029, страница 12
12 13
Operation Operation
Manual/automatic tuning
Manual tuning: To find a station, select a
band first, then press and hold / buttons
on the RC until MANUAL appears on the display
or press SEEK+/SEEK- to enter manual tuning,
then press these buttons repeatedly to search
for the needed frequency upward or downward.
Automatic tuning: To find a station, select a
band first, then press and hold / buttons
on the panel or press / buttons on the
RC, the automatic downward/upward search
will start. It will play when a station is found.
Programming preset stations
• To store a station: Select a band (if
needed); find a station by manual/automatic
tuning. Then press MEM button and rotate
VOLUME knob to choose a memory position
(1-6), and finally press OK button to confirm.
Or, after finding a station, press and hold a
number button (1-6) on the RC to save the
station in the corresponding memory position.
• To recall a station: Select a band (if
needed); Press / buttons on the panel.
Or press a number button (1-6) on the RC to call
the station saved in the corresponding position.
Auto memory store
Select a band, press and hold RPT/P.SCAN
button on the RC to enter auto store mode.
The radio will automatically store 6 stations to
the 6 preset memories of the current band. To
stop auto store, press this button again.
During auto station preset, the unit will
search and store stations with the strong signal
first, and then weaker signal stations until the
memories are full.
Preset scan
Select a band, press RPT/P.SCAN button
on the RC to scan all preset stations in the
memories of the current band, each preset
scan for 5 seconds. To stop preset scan, press
the button again.
RDS function
RDS (Radio Data System) service availability
varies with areas. Please understand if RDS
service is not available in you area, the
following service is not available, either.
AF (Alternative Frequencies)
function
Press and hold AF/TA button on the RC to
turn on AF function. If the AF function is on, the
display will show “AF”.
When the radio signal strength is poor,
enabling the AF function will allow the unit to
automatically search another station with the
same PI (Program Identification) as the current
station but with stronger signal strength, so that
you do not have to retune the stations when
driving between different transmitter coverage
areas. When AF symbol is on, it means RDS
information is received; when AF symbol is
flashing, it means RDS information is not yet
received. If RDS service is not available in your
area, turn off the AF mode.
TA (Travel Announcement) / TP
(Travel Program Identification)
Enable or disable TA mode by pressing
and holding OK button on the front panel or
by pressing AF/TA button on the RC. Default
setting is OFF.
When TA function is activated, it will search
the station with TA information automatically.
If there is no TA information, it will search the
station with TP information automatically, if
there is no TP information either, it will return to
the previous station after searching.
When receiving the station with TP
information but without TA information,
TP icon is on and TA icon keeps blinking;
when receiving the station with TP and TA
information, both TP and TA icons are on.
When playing in other mode and TA
information is received, it will change to the
radio mode automatically. After playing over, it
will return to the previous mode. To ignore the
TA information, press AF/TA button on the RC
or press and hold OK button on the panel.
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Гость
28 марта 2020, Екатеринбург
НЕ ПОКАЗЫВАЕТ ЭКРАН ФИЛЬМ С ФЛЕШКИ
0 ответов
Ответить
0