- Тип техники
- Бренд
Просмотр инструкции автомагнитолы Hyundai Electronics H-CMD4029, страница 11
11
Operation
RDS SETUP (available in Radio, Disc, USB
and Card modes):
TA: Seek/Alarm. In TA SEEK mode, the unit
will seek for traffic announcement program
when TA is pressed; in TA ALARM mode, no
TA/TP is displayed and the alarm is set off.
PI: Mute/Sound. PI sound refers to the
reception noise when the AF function tries to
scan alternative frequency.
RETUNE: Long/Short. RETUNE refers to the
time period the unit allows for radio scan when
reception is interrupted. “S” represents a time
period of 30 seconds and “L” represents a time
period of 90 seconds.
MASK: DPI/ALL. During MASK DPI mode,
the unit will mask only the AF which has
different PI, this is the default mode; during
MASK ALL mode, the unit will mask the AF
which has different PI and no RDS signal with
high field strength.
EON TA: DX/Local. If you want to receive
information from local stations only, select
EON TA LOC mode. Otherwise, select EON
TA DX mode.
REG : REG ON (the receiver accepts
regional variants of the tuned station with REG
icon turned on), and REG OFF (the receiver
ignores regional variants).
TA VOL: Adjust level of TA volume, support
50 levels. Default level is 0.
EXPERT (available in Radio, Disc, USB and
Card modes):
DX: Set radio station search by DX or
LOCAL mode. When the LOCAL function is
on, the local stations (stations with weak radio
signal) can be played. When DX is on, both
local and distant stations (stations with strong
radio signal) can be played.
Stereo: Set radio reception at STEREO or
MONO mode. Improvement of reception of
distant stations can be done by selecting mono
mode, which may cut down some reception
noise. To select stereo or mono you can also
press STEREO/MONO button on the RC.
Beep: BEEP ALL (beep sound will be heard
when buttons are pressed), BEEP 2ND (beep
sound will be heard when buttons are pressed
and held) and BEEP OFF (no beep sound for
button pressing).
Loud: Set loudness on or off. LOUD function
is to emphasize the bass output.
Backlight: Set OSD backlight: MID => HIGH
=> LOW.
OSD color: Set OSD color: Dark Blue =>
Violet => Light blue.
CLOCK (available in Radio, Disc, USB and
Card modes):
Clock: Select ON to show the current time
on the display.
Clock hour: Set 12-/24-hour time mode.
Clock adjust: Set the current time.
Mode setting
Press MODE button to select between unit
operation modes: TUNER => Disc => USB =>
Card => AUX.
Disc, USB and CARD modes will only
show on the display when a disc, a USB device
or a memory card is inserted into the unit.
AUX jack
AUX-in jack is intended for connecting an
external audio or video equipment to amplify
the sound. If connection is made correctly, the
audio signal from the external source will be
translated through the acoustics of the head
unit. This enables to adjust the volume and
quality of the sounding. For example, you can
connect an MP3-player to listen to tracks using
the car acoustic system.
Radio operations
Band selection
Press repeatedly BAND button on the panel
or RDM/BAND button on the RC to select your
desired radio band in RADIO mode: FM1, FM2,
FM3 (OIRT), MW. In each set of the bands you
can store up to 6 preset stations, making total
24 preset memory stations.
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
Гость
28 марта 2020, Екатеринбург
НЕ ПОКАЗЫВАЕТ ЭКРАН ФИЛЬМ С ФЛЕШКИ
0 ответов
Ответить
0