- Тип техники
- Бренд
Просмотр инструкции измерительного прибора Condtrol DeuX, страница 32
32
CONDTROL DeuX/UniX
2
/UniX
3
/UniX
5
CROSS LINE
LASER
User Manual
CROSS LINE
LASER
to wait until the temperature aligns.
• Protect the instrument from blows and falls. After a strong external
influence on the instrument it is always necessary to check accuracy before
starting the work again (See «Accuracy Check»).
• Switch off the instrument during transportation. Always switch the On/Off
(D) to the right position. When switching off, the leveling unit, which can be
damaged in case of intense movement, is locked.
Switch on/off
Move switch the On/Off (D) to upper position.
By consecutive pressing 1 the instrument is switched to the different
operating modes displayed on the keypad (horizon; vertical; horizon and
vertical at the same time; defining of directions; horizon, vertical, defining
of directions at the same time).
To work with the automatic compensation switch on the instrument as it
is described above and switch the On/Off (D) to the outside left position.
Switching of the operating modes also is made by pressing 1.
At a low charge of the batteries the indicator 3 flashes red.
- Do not direct the laser beam on people or animals and do not look in the
laser beam, even from a long distance.
- Do not leave the switched-on instrument unattended and switch it off after
using.
To switch off the instrument move the On/Off (D) to the lower position, at this
the leveling unit is blocked.
Ваш отзыв будет первым