- Тип техники
- Бренд
Просмотр инструкции увлажнителя воздуха Vitek VT-2335 BK, страница 6
6
ENGLISH
– Rinse the process chamber (4) and the water
tank (6) several times. Wipe the process
chamber (4) with a soft cloth.
– Clean the air humidifier body (12) with a soft,
slightly damp cloth, and then wipe it dry.
– Remove and clean the air inlet grid (1) as it
becomes dirty.
Notes:
– Do not immerse the air humidifier body into
water or other liquids.
– Do not use abrasives or solvents for cleaning
the «sprayer».
– As a cleaning agent for the «sprayer» you can
use a descaling agent for kettles, strictly fol-
lowing the instruction for this substance.
Mineral filter (10)
The mineral filter purifies water of admixtures,
heavy metal ions, bacteria etc.
Cleaning the mineral filter
– It is recommended to wash and clean the min-
eral filter (10) from time to time, especially if
using «hard water».
– Remove the water tank (6), unscrew the
lid (11) and remove it, unscrew the mineral fil-
ter (10), rotating it counterclockwise.
– Fill a suitable container with water of room
temperature, add some vinegar (approxi-
mately a tablespoon) and put the mineral fil-
ter (10) into the container for approximately
10 minutes.
– Take the filter (10) out and wash it under run-
ning water jet.
– Install the mineral filter (10) on the lid (11)
rotating it clockwise.
STORAGE
– Pour the water out of the tank and make sure
that the process chamber and the «sprayer»
are dry before taking the unit away for storage.
– Do not keep the unit with water inside the tank
or the process chamber.
– Before taking the mineral filter (10) away for
storage, clean it and dry; keep the filter (10) in
a darkened cool place.
– Keep the air humidifier away from children in
a dry cool place.
TROUBLESHOOTING
Malfunction Possible causes Troubleshooting
No “mist” The unit is connected improperly Check if the power plug is inserted into the
mains socket.
The unit is off Switch the unit on by pressing the
button (13).
Water tank is empty or there isn’t
enough water in the tank.
Fill the water tank with enough water.
Foreign smell
appears
during the
operation
First use Disconnect the unit from the mains. Remove
the water tank, unscrew the lid (11) and
pour the water out of the water tank, then
leave the water tank in a dry cool place for
12 hours.
Dirty or stale water Unplug the unit, remove the water tank,
unscrew the lid (11), pour the water out of the
water tank and clean the tank (as described
in the chapter “Cleaning and care”),
then fill it with clean water.
Foreign noise The water tank is installed
improperly.
Make sure that the water tank is installed
properly.
Not enough water in the tank Fill the water tank with enough water.
The unit is placed on an uneven
surface.
Place the unit on a flat steady surface.
IM VT-2335.indd 6 27.02.2017 17:35:47
Ваш отзыв будет первым