- Тип техники
- Бренд
Просмотр инструкции автомагнитолы Soundmax SM-CDM1058, страница 20
20
4 Jazz, Co untry Weather, Fina nce, Chi l dren
5 Nation, Oldies Social, Religion, Phon e IN
6 Folk Tra vel, L eisure, Document
When PTY is selected, the radio starts to search corresponding PTY information, and stops if the
corresponding PTY information is detected. If no buttons are pressed within several seconds, previously
selected PTY is searched. During 1 loop, if desired PTY is not found, the unit will return to previous mode.
Press PTY button for the 3rd time to switch the PTY function off.
Other parameter setting
To choose the corresponding parameter, press and hold SEL button, then press it repeatedly until the display
shows the needed parameter. Turn VOL regulator on the front panel or press VOL+/VOL- buttons on the RC
to choose the needed value. After choosing, please leave the unit idle to activate.
TA SEEK/T A ALARM
When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station
which has not the same station (PI – Program Information) as the last station, but has the TP information.
When TP information gets lost at the current station for retune time which is set by RETURN SHORT (30
seconds) or RETURN LONG (90 seconds), the radio starts to retune to next same PI station. When same PI
station does not catch in 1 cyclic search, the radio retunes to next station with TP information. In TA SEEK
mode, the unit will seek for traffic announcement program when TA button is pressed; in TA ALARM the unit
does not retune to TA infor mation.
PI SO UND/MUTE
Choose either PI sound or PI mute. PI sound refers to the reception noise when the AF function tries to scan
alternative f requ ency.
MASK DPI/MASK ALL
During AF search, PI stations and non-RDS (Radio Data Station) stations with strong signal will be masked, in
the latter case, the non-RDS stations may cause interference, resulting the real AF to be masked due to the
misjudgment of the radio under interference. Rotate VOL regulator on the front panel or press VOL+/VOL-
buttons on the RC to sele ct the desired mode: MASK DPI an d MASK ALL. During M ASK DPI mode, the unit will
mask only the AF which has different PI, this is the default mode; during MASK ALL mode, the unit will mask
the AF which has different PI and no RDS signal with high field strength.
Ваш отзыв будет первым