Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции автомойки Karcher CB 2 23, страница 40

Karcher
- 18
148 Filling level of foam too low Detergent container almost empty refill the corresponding detergent
149 Filling level of shampoo too low
150 Filling level of drying aid too low
151 Filling level of hot wax too low
152 Filling level of insect cleaner too low
153 Filling level of polish too low
154 Filling level of chemicals 2 too low
155* Lack of water supply to high pressure
pumps
Water supply tank for high pressure
pumps empty
Check water tank, repeat washing proc-
ess, call Customer Service
156* Protective motor switch high pressure
pump 1 was triggered
Protective motor switch in the pump
switching cabinet was triggered
Switch on the protective motor switch
again, repeat washing process, call Cus-
tomer Service
157* Protective motor switch high pressure
pump 2 was triggered
159* Thermal switch high pressure pump 1 was
triggered
Motor of high pressure pump 1 too hot
or defective
Repeat washing process, emergency op-
eration possible by using the second high
pressure pump, call Customer Service
160* Thermal switch high pressure pump 2 was
triggered
Motor of high pressure pump 2 is too
hot or defective
Repeat washing process, emergency op-
eration with first high pressure pump is
possible, call Customer Service
162 Pressure switch of high pressure pump
was triggered forward for roof nozzles
High pressure nozzles of roof blocked
towards the front or compressed air
supply to the portal has stopped or
pressure switch is defective
Clean the corresponding high pressure
nozzles, check compressed air supply, re-
peat washing process, call Customer
Service
163 Pressure switch of high pressure pump
was triggered backward for roof nozzles
High pressure nozzles of roof blocked
towards the rear or compressed air
supply to the portal has stopped or
pressure switch is defective
164 Pressure switch of high pressure pump
was triggered for side nozzles
High pressure nozzles of side pipes
blokked or compressed air supply to
portal has been switched off or pres-
sure switch is defective
165 Pressure switch of high pressure pump
was triggered for wheel cleaning
High pressure nozzles of wheel wash-
ing blocked or compressed air supply
to portal has been switched off or pres-
sure switch is defective
166 Pressure switch of high pressure pump
was triggered for underbody cleaning
High pressure nozzles of underbody
cleaning blocked or compressed air
supply to portal has been switched off
or pressure switch is defective
167 Pressure switch of high pressure pump
was triggered for floor cleaning
High pressure nozzles of floor clean-
ing blocked or compressed air supply
to portal has been switched off or pres-
sure switch is defective
168* Pressure switch of high pressure pump
too high despite bypass switching
Compressed air supply to the portal
has been stopped or pressure switch
is defective
Check compressed air supply, repeat
washing process, call Customer Service
172 Anti-frost active (traffic signal forward and
backward blinks five times)
Frost proteciton is active Washing cannot be done until the anti-
frost temperature is exceeded again
175 Trailer coupling detected Side brush has got hooked into the
trailer coupling
No action is required; washing will contin-
ue automatically without the back being
washed a second time
180 CAN bus error, module A8, no connection
(in main switching cabinet CB2)
Loose connecting chord of the plates,
plates defective
Switch off and switch on the unit, repeat
washing process, call Customer Service
181 CAN bus error, module A9, no connection
(high pressure distributor to portal)
185 CAN bus error, module A29, no connec-
tion (pump switching cabinet)
190 Excess current outlets CAN Bus module
A8 (in main switching cabinet CB2)
Short circuit, water leakage Switch off and switch on the unit, repeat
washing process, call Customer Service
191 Excess current outlets CAN Bus module
A9 (high pressure distributor to portal)
195 Excess current outlets CAN Bus module
A29 (pump switching cabinet)
Display Fault Possible cause Remedy
40 EN
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован

Смотрите также другие инструкции раздела Автомойки

Смотрите также другие инструкции раздела Karcher