Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции соковыжималки Vitek VT-1609 ST, страница 4

Vitek
4
ENGLISH
Preparation for operation
Unpack the unit.
Before you connect the unit to the mains,
make sure that the voltage specified on
the unit corresponds to the voltage in your
home socket.
Carefully wash all the removable parts,
which will contact with products, and dry
them.
Note: Be carefully while holding the
shredding sieve; its surface is very
sharp.
Wash vegetables/fruits and cut them into
pieces, which will easily pass into the cov-
er throat of the unit.
While extracting juice from stone fruits (for
instance cherry, peach etc.) remove pits
from the fruits.
Making juice
Put the unit on the stable dry and flat sur-
face.
Before assembling, make sure that the
unit is switched off and unplugged.
Set the juice tank (5) on the motor unit (9).
Set the shredding sieve (4) in the juice
tank (5), provided proper installation you
will hear a specific flick.
Note: - Do not use the shredding sieve if
it has any defects.
Set the cover (3) on the juice tank (5).
Set the juice container (8).
Lift the clamp (7), and match it with the
groves on the cover (3).
Put a container (11) or another vessel un-
der the pouring spout (6).
Insert the plug into the socket.
Switch on the juicer by setting the switch
(10) to the “I/low speed” position or to the
“II/high speed’ position.
Note:
- “1/low speed” - is used to extract juice
from soft vegetables/fruits (tomatoes,
pears, strawberry, oranges, plums,
grapes, pumpkin, onion, cucumbers
etc.).
- “2/high speed” - is used to extract
juice from hard vegetables/fruits (ar-
tichoke, carrot, apples, pepper, beet-
root, potatoes, pineapples, vegetable
marrows, celery, spinage, dill, kurrat
etc.).
- the unit will switch on only if all the re-
movable parts are installed properly
and the upper cover is fixed by the
clamp (7).
Put the products only while the motor is
operating.
Gradually put preliminary cut pieces of the
products into the throat (2) of the cover
(3) and slightly press them with the pusher
(1). Do not press strongly the pusher; it
can lead to worse quality of the juice or to
a stop of the shredding sieve rotation (4).
Do not immerse your fingers or other ob-
jects into the throat (2) of the cover (3).
Periodically check the condition of the
shredding sieve (4) concerning blockage
of the filter, if necessary wash the shred-
ding sieve (4).
Check the container (8), if it is full, switch
off the unit, take the plug out of the socket,
remove the container (8) and remove the
pressed skins.
After using of the unit switch it off by set-
ting the switch (10) to the “0” position, wait
when the shredding sieve stops complete-
ly (4) and take the plug out of the socket.
Dismantle and clean the unit each time af-
ter usage:
- Remove the pusher (1) from the throat (2).
- Pull the clamp (7).
- Remove the upper cover (3).
- Remove the juice tank (5) together with
the shredding sieve (4).
- Clean and wash all the details after usage.
ATTENTION: When making juice from “hard”
vegetables/fruits maximal operating time
should not exceed 1 minute, with the interval
4
1609.indd 41609.indd 4 08.06.2009 16:33:5708.06.2009 16:33:57
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован