- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-8105 VT, страница 6
6
ENGLISH
ATTENTION!
Before installing the dust bin (11) into the vac-
uum cleaner body make sure that the HEPA fil-
ter (25) is dry and there is no liquid inside the
dust bin (11).
Cleaning the outlet HEPA filter (21)
• Switch the vacuum cleaner off and unplug it.
• Remove the outlet filter (20) grid by pressing
on the lock (19) downwards and remove the
HEPA-filter (21).
• Wash the HEPA filter (21) under slightly warm
water jet. Do not wash filters in a dishwash-
ing machine.
• Dry the HEPA filter (21). Do not dry the HEPA
filter (21) with a hairdryer.
• Install the HEPA filter (21) back to its place.
• Install the outlet filter grid (20) back to its place.
Notes:
– Before installing the HEPA filter (21) make
sure that it is dry.
– Do not dry the HEPA filter (21) with a hairdryer.
Vacuum cleaner body
– Wipe the vacuum cleaner body with a soft,
slightly damp cloth and then wipe it dry.
– Do not immerse the body of the vacuum
cleaner, the power cord and the power plug of
the unit into water or other liquids. Provide that
no liquid gets inside the vacuum cleaner body.
– Never use solvents or abrasives to clean the
surface of the vacuum cleaner.
STORAGE
• Before taking the vacuum cleaner away for
long term storage, clean its body, the dust bin
(11) and the filters (21, 24, 25).
• For easy storing use the horizontal brush stor-
age (17).
• Keep the vacuum cleaner away from children
in a dry cool place.
DELIVERY SET
1. Vacuum cleaner with the dust bin
and filters installed – 1 pc.
2. Flexible hose – 1 pc.
3. Telescopic extension pipe – 1 pc.
4. Universal brush with the “FLOOR/CARPET”
switch – 1 pc.
5. Crevice nozzle – 1 pc.
6. Furniture brush – 1 pc.
7. Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Supply voltage: 220-240 V ~ 50 Hz
Maximum power consumption: 2200 W
Suction power: 350 W
The manufacturer reserves the right to change
the unit specifications without a preliminary noti-
fication
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
IM VT-8105.indd 6 22.08.2017 11:40:09
Ваш отзыв будет первым