Просмотр инструкции пылесоса Vitek VT-8105 VT, страница 4
4
ENGLISH
• Clean the vacuum cleaner regularly.
• Keep the vacuum cleaner in a dry cool place.
• Do not use the vacuum cleaner to clean pets.
• Close supervision is necessary when chil-
dren or disabled persons are near the oper-
ating unit.
• This unit is not intended for usage by children.
During the unit operation and breaks between
operation cycles, place the unit out of reach
of children.
• The unit is not intended for usage by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience or
knowledge if they are not under supervision of
a person who is responsible for their safety or
if they are not instructed by this person on the
usage of the unit.
• Do not leave children unattended to prevent
using the unit as a toy.
• For children safety reasons do not leave poly-
ethylene bags, used as packaging, unattended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
• Regularly check the power plug and power
cord integrity for damages.
• Never use the unit if the power cord or the
power plug is damaged, if the unit works
improperly or after it was dropped.
• Do not attempt to repair the unit. Do not disas-
semble the unit by yourself, if any malfunction
is detected or after it was dropped, unplug
the unit and apply to any authorized service
center from the contact address list given in
the warranty certificate and on the website-
www.vitek.ru.
• Transport the unit in the original package only.
• For environment protection do not discard the
unit with usual household waste after its ser-
vice life expiration; apply to a specialized cen-
ter for further recycling.
• Keep the unit out of reach of children and dis-
abled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
ASSEMBLING THE VACUUM CLEANER
After unit transportation or storage at low
temperature keep it for at least three hours
at room temperature before switching on.
– Unpack the unit completely and remove any
stickers that can prevent unit operation.
– Check the unit for damages; do not use it in
case of damages.
– Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
Note: before replacing the brush (1) or the
attachments (26, 27) or cleaning the dust bin
(11) switch the vacuum cleaner off and take the
power plug out of the mains socket.
Attaching and removing the flexible hose
• Insert the flexible hose ending (8) into the air
inlet (10).
• Insert the hose with a slight effort until lock-
ing.
• If you need to remove the flexible hose, press
the clamps (9) and detach the hose.
Attaching the telescopic pipe and the
attachments
• Attach the telescopic extension pipe (4) to the
flexible hose (7).
• Extend the lower part of the telescopic exten-
sion pipe to the required length, having pre-
liminary pressed the clamp (3).
• Select the required attachment - the floor/
carpet brush (1), the crevice nozzle (26) or the
attachment (27) - and connect it to the tele-
scopic extension pipe (4).
• If necessary, you can attach the attachments
(26, 27) directly to the flexible hose (7).
• During the operation hold the unit by the han-
dle (6).
USING THE BRUSH ATTACHMENTS
Universal brush with the “FLOOR/CARPET”
switch (1)
Set the switch (2) on the brush (1) to the required
position (depending on the type of the surface
being cleaned).
Crevice nozzle (26)
The crevice nozzle is intended for cleaning of
radiators, chinks, corners and spaces between
cushions.
Brush attachment for furniture 2 in 1 (27, 28)
Use the attachment (27) for cleaning fabric sur-
faces of upholstered furniture. To collect dust
from polished furniture surface, install the
brush (28) on the attachment (27), the pile on
the brush (28) prevents damage to polished fur-
niture surface.
IM VT-8105.indd 4 22.08.2017 11:40:08
Ваш отзыв будет первым