- Тип техники
- Бренд
Просмотр инструкции кофеварки Vitek VT-1525 BK, страница 6
6
ENGLISH
It is not necessary to remove the water tank (16)
from the unit to refill it; pull the tank out halfway and
use a suitable container to pour the water in.
•
Remove the filter holder (5) from the coffee
maker boiler by turning the holder handle (3)
clockwise in the direction of the inscription
«INSERT».
•
Put ground coffee in the filter (6) and slightly
tamp it with the back side of the measuring
spoon (21).
•
Attach the filter holder (5) to the coffee maker
boiler; to do this, place the filter holder handle
(3) under the inscription «INSERT» on the cof-
fee maker body, insert the holder (5) into the
boiler and turn the filter holder handle (3) coun-
terclockwise until bumping (in the direction of
the mark «I») (pic. 1).
•
When the ready indicator (14) lights up green,
press the water supply button
(12) and water
will start pouring from the outlet openings of the
filter holder (5). Watch the cup being filled with
ready coffee.
•
After the cup is filled with ready coffee (or if the
coffee color becomes less rich), press the but-
ton
(12) and switch the water supply off.
•
After you remove the cup with the coffee, some
water may drip from the filter holder openings.
It is normal. Control the tray (1) filling, periodi-
cally pour out the liquid from it and wash the tray
(1) with water.
Attention!
–
Do not remove the filter holder (5) during coffee
maker operation.
Notes:
–
Successive making of coffee should be per-
formed with an at least 5 min interval.
–
Use only clear water for making coffee and keep
the removable water tank (16) clean.
–
Before making coffee wait until the ready indi-
cator (14) lights up green, showing that the
water temperature in the boiler has reached the
required value.
–
During the coffee maker operation the ready
indicator (14) will go out and light up again peri-
odically, indicating the heating element oper-
ation. This operation mode keeps the boiler
temperature within the set range.
•
Switch the coffee maker off by pressing the but-
ton
(9), the indicators (8) and (14) will go out.
•
Wait until the coffee maker cools down and
remove the filter holder (5).
•
To remove the filter holder (5), turn the handle
(3) in the direction of the inscription «INSERT»
on the coffee maker body and remove the
holder (5).
•
Lift the filter clamp (4) and press it to the holder
(5), holding the filter (6) with it, turn the holder
(5) upside down and remove ground coffee
remnants.
•
Remove the filter (6) from the holder (5) and
wash the filter.
HOW TO MAKE A GOOD ESPRESSO
•
Use fresh ground coffee for “espresso” coffee
makers.
•
Slightly tamp the ground coffee in the filter (6),
you can do it with the back side of the measur-
ing spoon (21).
•
Coffee strength depends on the quality and
grinding degree of coffee beans and on the
water supply time.
•
If coffee is pouring out too long, this means the
coffee powder is too fine or it is tamped too
strongly.
MAKING CAPPUCCINO
Make coffee, as described in the section «MAKING
ESPRESSO», in a cup with enough capacity to add
frothed milk or cream.
Note: The first portion of steam may contain some
water; to obtain dry water steam it is necessary to
release the steam into an appropriate container
during several seconds.
Attention! When switching the steam supply on,
be careful to avoid burns by hot water drops and
hot steam.
•
Make sure that there is enough water in the
removable tank (16) and the steam supply knob
(15) is set to the position «-».
•
Press the button (13) and wait until the ready
indicator (14) lights up green. Place a suitable
cup under the cappuccinator pipe (18).
•
Switch the steam supply on slowly turning the
knob (15) counterclockwise in the direction of
the symbol “+”.
•
Wait until some water pours from the cappuc-
cinator pipe tip (19), after that steam will go out
more intensively; switch the steam supply off by
setting the steam supply knob (15) to the posi-
tion “-”.
•
Take a narrow high tumbler (preferably a metal
one), and fill it with cold milk or cream approxi-
mately by 1/3.
•
Take the cappuccinator handle (17) and draw
the cappuccinator pipe tip (19) into the tumbler,
immersing it into milk by approximately 2 cm,
IM VT-1525.indd 6 25.04.2016 15:17:59
Ваш отзыв будет первым