- Тип техники
- Бренд
Просмотр инструкции утюга Saturn ST-CC0231, страница 7
6
1. Turn off the steamer and wait
until no steam emits from the Steam
spout.
2. Fabric brush’s pegs aim and
insert the holes on the Steam spout.
See Figure 5.
3. Push the brush and firm it in
place.
CAUTION:
Do not install the accessory while
steam emitting from the Steam spout
and avoid burns.
INSTRUCTIONS FOR USE
1. Unplug the Power Cord, and
turn the Switch to the “Off or “0”
position.
2. Remove the Water Tank, turn
it upside down, and unscrew the Valve
Cap. Fill the Water Tank with cool
water, and replace the Valve Cap. Hot
water is forbidden. To prolong the
lifetime of your steamer, we
recommend using distilled or
demineralized water. Place the water
tank back into the unit and make sure
it is sitting properly and securely in
the flume. Do not let the steamer
working with a dry water tank or else
you can damage the unit.
3. Plug the unit into an electrical
outlet.
4. Turn on the Switch. Verify
that the light is on the switch.
Steam should start flowing from the
spout in approximately 45 seconds.
5. Please select an appropriate
programs (1 or 2) according to
different materials of the clothes for
better ironing performance.)
6. When you finish your steam
iron, turn the switch on the “Off” or
“0” position and pull plug out from the
outlet.
INSTALL PARTS
Pants clamp installation:
Lean the pants clamp, let flute corner
towards on the fix-panel of steam
nozzle, and clip pants clamp gently
through the corner, pants clamp can
be fixed on steam spout.
Folding rack installation (Optional
Parts):
1. Take out folding racket, pull
out pin(A);
2. Ensure hole of hanger aim on
the folding rack hole(B), put the
pin(A) through the hole. Fix the
hanger and folding rack;
3. Pull and open the folding
rack, push bar(C) from left to right
and fix the crossbar (C);
4. When finish Ironing, push
Bar(C) from right to left and fold rack.
IRON THE TROUSERS SEAM
In order to iron the trousers seam
straight and smooth when using our
garment steamer, please use the
pants clamp. Make the connection to
be open between the spout and pants
clamp, grip the pants clamp and iron
the trousers seam vertically, then
Ваш отзыв будет первым