- Тип техники
- Бренд
Просмотр инструкции утюга Saturn ST-CC0231, страница 8
7
trousers seam can be very straight
and smooth. Also you can use Mini
ironing board at the back side and
spout at front side, it will be easy and
fast also for ironing trousers and
pants.
CLEANING AND STORAGE
We recommend you follow this
procedure at least once per month to
extend machine working periods;
1. Turn the Switch to “off or “O”
position.
2. Unplug the unit from the
power outlet.
3. Ensure the steamer to cool
for at least 30 minutes.
4. Remove the Hose and shorten
the Telescopic Pole, then set them
aside.
5. Remove and drain the Water
Tank. Rinse the water tank with fresh
water, and drain completely.
6. Drain the steamer by
removing the Drain Plug and emptying
the contents. Picture A.
7. Flush the unit by filling the
Water flume and the Hose Connector
with fresh water and draining
completely. Put the Drain Plug back.
8. Wrap the Hose around the
Telescopic Pole one time. Place the
Steam spout on the steam hanger.
9. Store in a cool and dry place.
REMOVING MINERAL DEPOSIT
Impure water containing mineral or
sediment may cause mineral deposit
leaving in the steamer, which will
affect the free flow of steamer. To
reduce the occurrence of mineral
deposit in the steamer, demineralized
or distilled water is recommended.
To remove the mineral deposit, please
follow below procedure:
1. Turn the unit off, and unplug
the power cord.
2. Remove the hose and pole
from the unit.
3. Drain the Water flume and
empty water from the Water Tank.
4. Mix a solution of 50% vinegar
and 50%wateror Citric acid.
5. Slowly pour the water-
vinegar or citric acid into the Hose
Connector or water tank about 0.6
Liters;
6. Let the unit power on and
work for 5-6 minutes.
7. Cool the unit for about 30
minutes, drain the solution out of the
Water Reservoir by removing the drain
plug and allowing the liquid to drain
into a sink or tub.
8. Drain the solution out of the
Hose Connector by tilting the unit over
a sink or tub and pouring the water
out of the Hose Connector.
9. Pour clean water in the Hose
Connector or Water flume inlet and
drain it. Repeat this step until the
vinegar odor dissipates.
10. Reassemble the unit and
operate normally.
IF THIS PROCEDURE DOES NOT
RETURN THE UNIT TO NORMAL
OPERATION, THE UNIT MAY NEED
SERVICING.
Ваш отзыв будет первым