- Тип техники
- Бренд
Просмотр инструкции морозильной камеры Saturn ST-CF1910, страница 8
14
then put into the appliance. If put
it in hot status, it will decrease the
cooling level of the goods nearby.
Make sure the door closed wholly to
save power consumption.
Put labels marked time onto the
goods. The goods stored early
should be taken out early.
Set different cooling temperatures
according to different goods. Too low
cooling temperature will waste power
consumption.
When switching off or a power
cut, must restart after 5 minutes
minimum. Or it will shorten the
compressor life or even damage
the compressor.
If know a power cut in advance, set the
thermostat for a low temperature and
keep the appliance cooling for some
time. And open the door as briefly as
possible. When power is cut, try not to
open the door and do not add goods
into the appliance.
Defrosting
Moisture in goods and air will change into frost on the low temperature
surface of the evaporator (the inner surface of the cabinet).
The frost will decrease the cooling effect. If the frost thickness reaches 5 ~
7mm, defrosting should be carried out.
1. Switch off and plug out, and take out all the stored goods.
2. Open the door, and remove the frost by a special defrosting shovel when
the frost gets soft.
3. Open the drain hole on the bottom, and open the drain cover on the outer
shell. The frost water will go out through the drain pipe.
15
4. Wipe off all the frost water, then plug in and switch on the appliance.
When the cabinet temperature reaches the set temperature, put the goods
back.
Do not defrost by metal edge tools or electrical heating tools. They may
damage the evaporator.
Faults and diagnosing
No cooling
Bad cooling effects
- Check if there is a power cut
- Check if the connection between
the plug and the socket is good.
- Check if the fuse is switched off
- Check if the currency protector
is workable. {If the appliance is
fixed with a currency protector)
- Check if the thermostat is on a suitable
position.
- Check if the appliance is exposed to
sunlight or near heat sources.
- Check if there is dust on the
compressor and condenser.
- Check if the stored goods are too
many.
- Check if there is no enough spaces
between the goods.
- Check if some goods are hot.
- Check if open the door too frequently.
- Check if the door is closed wholly.
- Check if the frost on inner cabinet is
too thick.
The appliance does not stop
working
Big noise
- Check if the thermostat is on too
high temperature.
- Check if put into too many
goods.
- Check if the ambient
temperature is too high.
- Check if the ground is flat and sturdy.
- Check if the appliance closes to walls.
- Check if the appliance contacts
something which is easily shocked
Ваш отзыв будет первым