- Тип техники
- Бренд
Просмотр инструкции морозильной камеры Saturn ST-CF1910, страница 7
12
Install the appliance in a dry
place. The appliance will get
rusted and have a poor insulation
if in a place with humidity or
water for a long time. Do not
install the appliance in the outside
place where rain can reach.
Usage at first time
Place the appliance according to
the installing requirements.
Open the door for air ventilating
Clean the inner cabinet before using.
After installing the appliance, wait for 30 minutes at least before switching
on the appliance. (During transportation the oil in the compressor may have
flowed into the refrigeration system.)
At the beginning, the cabinet is hot and the compressor will work for a long
time and then stopped by the thermostat at the set temperature. At that time,
the compressor can work and stops regularly.
Recommend to put goods into the cabinet when the cabinet temperature
reaches the set temperature.
Thermostat
Open the door as briefly as possible. Make sure the door closed wholly to
save power consumption.
The cabinet temperature is controlled by the thermostat on the panel. The
thermostat can set a suitable temperature range according to different
ambient temperatures and different kinds and QTY of goods.
The green indicator is the POWER indicator. When plugging in, the green
indicator works.
The red indicator is the OPERATION indicator. When the compressor
runs, the red indicator works.
13
The thermostat knob can be rotated from MIN to MAX.
When rotating clockwise, the cooling time will be longer &
the stopping time will be shorter. In this way, the cabinet
temperature will be lower.
When rotating anticlockwise, the cooling time will be
shorter & the stopping time will be longer. In this way, the
cabinet temperature will be higher.
After adjusting the thermostat, it will take some time to
reach the stable working.
Replace the door lamp
Cut off power cord. Disassembly lamp-chimney, use hand disassemble
lamp. Contrarotate lamp and take out the lamp.
Clockwise circumvolve new lamp into the lamp holder.
(Specification of lamp: can not more then 10W screw base lamp.)
General knowledge for usage
Keep some spaces between stored
goods. It do good for cooling air
circulating and heat exchange and
a better cooling effect will be
achieved.
Seal the food by fresh kept bags or
closed container to avoid smell-mixed
or dry.
For hot food, hold it cooled and
Open the door as briefly as possible-
Ваш отзыв будет первым