Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции конвектора Saturn ST-HT4017, страница 5

Saturn
4
electric shock or fire, or damage the
heater.
11. To prevent a possible fire, DO
NOT block the air intakes or exhaust in
any manner. DO NOT use on soft
surfaces, like a bed, where openings
may become blocked.
12. A heater has hot and arcing or
sparking parts inside. DO NOT use in
areas where gasoline, paint, explosive
and/or flammable liquids are used or
stored. Keep unit away from heated
surfaces and open flames.
13. Always plug heaters directly
into a wall outlet receptacle. Never use
with an extension cord or relocatable
power tap (outlet/power strip)
14. To avoid fire or shock hazard,
plug the unit directly into a 220-240 V
AC electrical outlet.
15. To disconnect heater, turn
controls to OFF, then remove plug from
outlet. Pull firmly on the plug, DO NOT
unplug by pulling on the cord.
16. Always unplug the unit before
moving or cleaning, or whenever the
heater is not in use.
17. Use only for intended
household use as described in this
manual. Any other use not
recommended by the manufacturer
may cause fire, electric shock, or injury
to persons. The use of attachments not
recommended or sold by unauthorized
dealers may cause hazards.
18. Always use on a dry, level
surface.
19. DO NOT use outdoors.
20. DO NOT attempt to repair or
adjust any electrical or mechanical
functions on this unit. Doing so will void
your warranty. The inside of the unit
contains no user serviceable parts.
Qualified personnel should perform all
servicing only.
21. Connect to properly grounded
outlets only.
22. Save these instructions.
OVERHEAT SAFETY FEATURE
This heater is equipped with a overheat
safety feature. When the heaters
internal components reach a certain
temperature that could cause overheat
and possible fire, the heater will
automatically shut off.
WARNING: This heater has a voltage
rating of 220-240 V. The cord has a
plug as shown in A. An adapter as
shown in C is available for connecting
three-blade grounding-type plugs to
two-slot receptacles. The grounding
lug extending from the adapter must
be connected to a permanent ground
such as a properly grounded outlet
box. The adapter should not be used if
a three-slot grounded receptacle is
available.
DO NOT DISREGARD THE SAFETY
PURPOSE OF THE GROUNDED PLUG.
WARNING: It is normal for the power
cord to feel warm to the touch;
however, a loose fit between the outlet
and the plug may cause overheating of
the plug. If this occurs, try inserting the
plug into a different outlet. Contact a
qualified electrician to inspect the
original outlet for damage.
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован

Смотрите также другие инструкции раздела Конвекторы