- Тип техники
- Бренд
Просмотр инструкции материнской платы Gigabyte GA 8IP900MK, страница 20
- 16 -GA-8IP900MK Motherboard
English
When an AGP 2X (3.3V) card is installed the 2X_DET w ill light up, indicating a non-supported
graphics card is inserted. Informing users that sy stem might not boot up normally due to
AGP 2X (3.3V) is not supported by the chipset.
Step 3: Install expansion cards
1. Read the related expansion card's instruction document before install the expansion card into the
computer.
2. Remove your computer's chassis cover, screws and slot bracket from the computer.
3. Press the expansion card firmly into expansion slot in motherboard.
4. Be sure the metal contacts on the card are indeed seated in the slot.
5. Replace the screw to secure the slot bracket of the expansion card.
6. Replace your computer's chassis cover.
7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
8. Install related driver from the operating system.
AGP Card
Please carefully pull out the small white-drawable
bar at the end of the AGP slot w hen yo u try to
instal l/ Uninstall the AGP card. Please align the
AGP card to the onboard AGP slot and press firmly
down on the slot .Make s ure your AGP card is
locked by the small white- drawable bar.
4. Four DDR memory modules are installed: If you install four memory modules at the same time, the
Dual Channel Technology will operate only when those modules have the same memory size and
type.
The following tables include all memory-installed combination types:
(Please note that those types not in the tables will not boot up.)
1 memory mo dule
2 memory mod ules
DIMM 1 DIMM 2 DIMM 3 DIMM 4
DS/SS X X X
X X DS/SS X
DS/SS DS/SS X X
l Figure 2: Don't operate Dual Channel Technology (DS: Double Side, SS: Single Side)
2 memory modules
4 memory modules
DIMM 1 DIMM 2 DIMM 3 DIMM 4
DS/SS X DS/SS X
X DS/SS X DS/SS
DS/SS DS/SS DS/SS DS/SS
l Figure 1: Dual Channel Technology (DS: Double Side, SS: Single Side)
Ваш отзыв будет первым