- Тип техники
- Бренд
Просмотр инструкции материнской платы Gigabyte GA 8AENXP DW, страница 51
BIOS Setup- 51 -
English
CPU Host Clock Control
Disabled Disable CPU Host Clock Control. (Default value)
Enabled Enable CPU Host Clock Control.
CPU Host Frequency(Mhz)
100Mhz ~ 600Mhz Set CPU Host Clock from 100Mhz to 600Mhz.
The actual range depends on the CPU you install. If you use a 533Mhz FSB processor, please set
CPU Host Frequency to 133Mhz. If you use an 800Mhz FSB processor, please set CPU Host
Frequency to 200Mhz.If you use a 1066Mhz FSB processor, please set CPU Host Frequency
to 266Mhz.
PCI Express Frequency(Mhz)
Auto Set PCI Express frequency automatically. (Default value)
100Mhz ~ 130Mhz Set PCI Express frequency from 100Mhz to 130Mhz.
Memory Frequency For
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency=533Mhz,
3 Memory Frequency = Host clock x 3.
4 Memory Frequency = Host clock x 4.
Auto Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=800Mhz,
2.00 Memory Frequency = Host clock x 2.
2.66 Memory Frequency = Host clock x 2.66.
3.00
(Note)
Memory Frequency = Host clock x 3.
Auto Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=1066Mhz,
1.5 Memory Frequency = Host clock x 1.5.
2 Memory Frequency = Host clock x 2.
2.66
(Note)
Memory Frequency = Host clock x 2.66.
3 Memory Frequency = Host clock x 3.
Auto Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on CPU Host Frequency(Mhz) and Memory Frequency For setting.
DIMM OverVoltage Control
Normal Set DIMM OverVoltage Control to Normal. (Default value)
+0.1V Set DIMM OverVoltage Control to +0.1V.
+0.2V Set DIMM OverVoltage Control to +0.2V.
+0.3V Set DIMM OverVoltage Control to +0.3V.
PCI-E OverVoltage Control
Normal Set PCI-E OverVoltrage Control to Normal. (Default value)
+0.1V Set PCI-E OverVoltrage Control to +0.1V.
+0.2V Set PCI-E OverVoltrage Control to +0.2V.
+0.3V Set PCI-E OverVoltrage Control to +0.3V.
FSB OverVoltage Control
Normal Set FSB OverVoltrage Control to Normal. (Default value)
+0.1V Set FSB OverVoltrage Control to +0.1V.
+0.2V Set FSB OverVoltrage Control to +0.2V.
+0.3V Set FSB OverVoltrage Control to +0.3V.
(Note) To use a DDRII 711 memory module on the motherboard, you must install a 1066MHz FSB processor and set Memory
Frequency For to 2.66.
To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB processor and set Memory
Frequency For to 3.00.
Ваш отзыв будет первым