- Тип техники
- Бренд
Просмотр инструкции материнской платы Gigabyte GA 8AENXP Dual Graphic, страница 55
Drivers Installation- 55 -
English
Switch the IEEE 1394 Driver
If you want to connect a DV camcorder or web camera to your system, you must use Microsoft IEEE 1394
driver. To switch from the Unibrain driver to Microsoft driver, you can simply run the Unibrain IEEE 1394
driver switch utility from the motherboard driver CD or manually switch the driver from Device Manager.
Step 1:
After entering operating system, insert the
motherboard driver CD in the CD-ROM drive. Go to
My Computer and right-click the CD-ROM drive icon
to select Open. Go to the Other folder and select the
1394B folder. Double-click the ubSwitch icon (Figure
5) and you should see an ubSwitch 1394 driver
switch utility icon in system tray (Figure 6).
Step 2:
Right-click the ubSwitch 1394 driver switch utility
icon and select Microsoft 1394 Drivers (Figure 7).
Then the utility will switch the IEEE 1394 driver
automatically. When the "MS 1394 drivers success-
fully installed" message appears, it means the
Unibrain IEEE 1394 driver has been interchanged with
Microsoft IEEE 1394 driver.
Step 3:
Go to Device Manager to make sure the driver for
the IEEE 1394 controller is correctly installed (Figure
8). (When you are not using DV camcorder or web
camera, remember to revert back to the Unibrain
driver.)
Figure 5
Figure 6
Figure 7
Figure 8
(Note) Everytime you need to run this utility after system restarts, you need to repeat steps 1~3.
Method A: Switch IEEE 1394 driver via Unibrain driver switch utility
(Note)
Ваш отзыв будет первым