- Тип техники
- Бренд
Просмотр инструкции квадроциклы Can Am DS 70 2011, страница 85
MAINTENANCE PROCEDURES
This section includes instructions for
basic maintenance procedures. If you
have the necessary mechanical skills
and the required tools, you can per-
form these procedures. If not, see
your authorized Can-Am dealer.
Other important items in the mainte-
nance schedule that are more difficult
and require special tools are best per-
formed by your authorized Can-Am
dealer.
WARNING
Turn off the engine and follow
these maintenance procedures
when performing maintenance.
If you do not follow proper main-
tenance procedures you can be
injured by hot parts, moving parts,
electricity, chemicals or other haz-
ards.
WARNING
Should removal of a locking de-
vice be required (e.g. lock tab,
self-locking fastener, etc.), always
replace it with a new one.
Engine Oil
Engine Oil Level
NOTICE
Check level frequently
and adjust as necessary. Do not
overfill. Operating the engine with
an improper level may severely
damage engine. Wipe off any
spillage.
NOTE: While checking the oil level, vi-
sually inspect engine area for leaks.
vmo2008-008-021_a
TYPICAL — RH SIDE OF ENGINE
1. Dipstick
With vehicle on a level surface, start
engine and let it run for several min-
utes, then stop engine and check the
oil level as follows:
1. Unscrew dipstick, remove it and
wipe it clean.
2. Reinstall dipstick and screw it in
completely.
3. Remove dipstick and check oil
level. It should be near or equal
to the upper mark.
vmo2008-020-007_a
1. Full
2. Add
3. Operating range
To add oil, remove dipsti
ck. Place a
funnel in the dipstick hole to avoid
spillage.
Add a small amount of oil and recheck
oil level.
Repeat until oil level reaches the dip-
stick’s upper mark. Do not overfill.
_______________
83
Ваш отзыв будет первым