Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции факса Brother FAX 2600 ч.2, страница 23

Brother
SETUP RECEIVE
5 - 6
Advanced Receiving Operations
Operation from Extension Telephone or External
Telephone
If you answer a fax call on an extension phone or on an external phone in the
EXT. jack, you can make your FAX/MFC take over by using the Fax Receive
Code. When you press the Fax Receive Code 5 1, the FAX/MFC starts to
receive a fax. (See
Setting F/T Ring Time, page 5-3 and Easy Receive, page 5-3.)
If the FAX/MFC answers a voice call and double-rings for you to take over, use
the Telephone Answer Code # 5 1 to take the call at an extension phone.
If you answer a call, and no one is on the line, assume you’re receiving a fax. At
the FAX/MFC phone, press Start, then hang up. At an extension phone, press
5 1, wait for fax receiving tones (chirps), then hang up. At an external phone,
press 5 1 and wait for the phone to be disconnected (the screen displays
RECEIVE) before you hang up. (Your caller will have to press Start to send
the fax.)
For FAX/TEL Mode Only
When the FAX/MFC is in FAX/TEL mode, it will use the F/T Ring Time
(double ringing) to alert you to pick up a voice call. If you’re at the FAX/MFC,
you can lift the handset to answer.
If you’re at an extension phone, you’ll need to lift the handset during the F/T
Ring Time and press # 5 1 between the double rings. If no one is on the line, or
if someone wants to send you a fax, send the call back to the FAX/MFC by
pressing 5 1.
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Fax
Receive Code is 5 1. The preset Telephone Answer Code is # 5 1.
1
For the FAX, press Function, 2, 4.
For the MFC, press Function, 1, 2, 4.
2
Press or to select ON (or OFF) and press
Set.
3
If you want to, enter a new Fax Receive Code,
then press Set.
4
If you want to, enter a new Telephone Answer
Code, then press Set.
5
Press Stop to exit.
Note
If you are always disconnected when accessing your external TAD remotely,
try changing the Fax Receive Code from 5 1 to # # # and the Telephone
Answer Code from # 5 1 to 9 9 9.
REMOTE ACT.:ON?
FAX RECEIVE:
*
51
TEL ANSWER:#51
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован