- Тип техники
- Бренд
Просмотр инструкции пылесоса Vitek VT-1833 PR/R/G, страница 5
5
ENGLISH
up flammable liquids such as petrol, sol-
vents, and never use it where such liquids
are stored.
• Never use the vacuum cleaner to pick up
water or other liquids, burning or smoke-
emitting cigarettes, matches, smoldering
ashes or fine dust such as from plaster,
cement, flour or cinder.
• Do not use the vacuum cleaner:
- without dust-collecting bin;
- if there is no water in the dust-collecting
bin;
- if the filters (20, 21, 24) are not installed in
the dust-collecting bin;
- if the output filter (13) is not installed
• The unit is intended for household usage
only; commercial usage of the vacuum
cleaner is prohibited.
STORE THE INSTRUCTIONS IN A
CONVENIENT PLACE
SAFETY PRECAUTIONS
• Do not use the vacuum cleaner in the
immediate vicinity of very hot surfaces,
next to ash trays, or where flammable
liquids are stored.
• Before beginning to clean, remove
sharp objects from the floor to avoid
damage of the filters.
• If suction power decreases abruptly
while cleaning, immediately turn off the
vacuum cleaner and check the tele-
scoping tube or flexible hose for foreign
objects. Turn off the vacuum cleaner,
and then unplug it from the power out-
let. Clear the obstruction and only then
proceed with cleaning.
ASSEMBLING THE VACUUM CLEANER
Completely unpack the vacuum cleaner
and check it for damages.
Before turning on the vacuum cleaner,
make sure that the voltage of the mains
corresponds to the voltage of the vacuum
cleaner.
Always turn off the vacuum cleaner and un-
plug it from the outlet before changing the
brushes/attachments, and before perform-
ing maintenance on it.
Filling the dust-collecting bin with wa-
ter
• Holding the handle (5) press the locking
button (4) and take the bin out of the vac-
uum cleaner (pic. 1).
• Open the latches (25) and remove the lid
of the bin (19).
• Fill the lower part of the bin (26) with wa-
ter till the MAX mark.
Note: Necessary quantity of water -
600 ml.
• Put the lid (19) on the lower part of the bin
(26) and lock the latches (25).
• Put the dust-collecting bin on its place;
check that the bin is locked in the case of
the vacuum cleaner.
Attaching and removing the flexible
hose (pic. 2)
• Insert the end of the flexible hose (8) in
the air inlet (6). Insert the hose until it
snaps, confirming a proper connection.
• To remove the flexible hose press the
locks (7) and disconnect the hose.
Attaching the extension tubes and at-
tachments (pic. 3, 4)
• Attach the telescoping extension tube
(11) to the flexible hose handle (10).
• Extend the lower part of the telescoping
tube to the desired length by pressing the
locking button.
• Select the desired attachment: carpet/
floor brush (12), small brush (15), crevice
attachment (16), attachment for furniture
upholstery cleaning (17) or turbo-brush
(18) and connect it to the telescoping ex-
tension pipe (11).
Carpet/floor brush (12) (pic. 5, 6)
Set the switch on the brush to the desired
position (depending on the type of the sur-
face you wish to clean).
1833.indd 51833.indd 5 20.04.2009 9:32:1320.04.2009 9:32:13
Ваш отзыв будет первым
Вопросы пользователей
Поиск:
по производителю
по типу техники
по модели
Сортировать:
по дате
c ответами
саша
02 мая 2020, Алматы
можно ли мыть фильтр hepa?
0 ответов
Ответить
0