- Тип техники
- Бренд
Просмотр инструкции квадроциклы Can Am DS 70 2011, страница 61
CONTROLS/INSTRUMENTS/EQUIPMENT
NOTE: This section provides basic
information on the functions of the var-
ious controls of your vehicle. For more
details on how to operate a control in
conjunction with others, refer to
OP-
ERATING INSTRUCTIONS
further in
this section.
1) Throttle Lever
The throttle lever is located on the RH
side of the handlebar.
When pushed forward, it increases the
engine speed and allows engagement
of the transmission.
When released, the engine speed
should automatically return to idle and
the vehicle will gradually slow down.
vmo2008-020-003_a
TYPICAL
1. Throttle lever
2. To accelerate
3. To decelerate
WARNING
Check throttle lever operation be-
fore you start the engine. If t
he
throttle lever does not function
smoothly, check for the cause.
Correct the problem before
rid-
ing the vehicle. Consult your au-
thorized dealer if you can't find or
solve the problem yourse
lf.
Speed Limiter
This vehicle is equipped with an ad-
justable speed limiter screw on the
throttle lever housing. The speed lim-
iter prevents the throttle from being
fully opened, even when the throttle
lever is pushed fully forward, thus lim-
iting available engine power and there-
fore vehicle speed.
vmo2008-020-004_a
TYPICAL
1. Speed limiter screw
2. Lock nut
3. Throttle lever cable housing
WARNING
Adults should always limit the ma-
ximum restricted speed within the
ability and capacity of the child to
operate the vehicle safely. Never
allow the child to adjust the speed
limiter screw.
BRP recommends that all beginners
start off with the speed limiter screw
turned in while they learn.
Adults can adjust the speed limiter
screw gradually to increase maximum
speed as the beginner becomes more
familiar with the operation of the vehi-
cle. Refer to the following table.
_______________
59
Ваш отзыв будет первым