Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции стиральной машины Zanussi FJS 974 N, страница 20

Zanussi
20
Something not working?
Problems which you can resolve yourself.
Problem Possible cause
The machine does not start
up:
The machine does not fill:
Check that the water tap is open.
Check that water is coming out of the tap.
Check that the inlet hose is not squashed or
kinked.
Check that the filter in the inle t hose is not blocked.
Check that the door is closed.
The machine fills then
empties immediately:
The end of the drain hose is too low. Refer to
relevant paragraph in “water drainage” section.
The machine does not empty
and/or does not spin:
There is water on the floor:
Too much detergent or unsuitable detergent
(creates too much foam) has been used.
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this
as the water runs down the hose; check to see if it
is damp.
Check that the drain hose is not damaged.
The machine vibrates or is
noisy:
Check that all the transit bolts and packing have
bee n re moved.
Check that the machine is not resting against
anything.
Check that the support feet are re sting firmly on the
ground.
Check that the la undry is eve nly distributed in the
drum.
Maybe there is ve ry little la undry in the drum.
Check that the drain hose is not squashe d or kinked.
A programme which ends with water in the drum has
bee n se lected.
Check that the filter is clea n.
Check that the door is firmly closed.
Check that the machine is plugged in and that there
is power a t the socket.
Check that the main fuse ha s not blown.
Check that the programme sele ctor dial is
positioned correctly.
Check that the O N/OFF button has been depresse d.
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован