Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции варочной панели Candy CDI 30, страница 16

Candy
EN-15
Care and Cleaning
The settings below are guidelines only. The exact setting will depend on
several factors, including your cookware and the amount you are cooking.
Experiment with the hob to find the settings that best suit you.
What? How? Important!
Everyday soiling on
glass (fingerprints,
marks, stains left by
food or non-sugary
spillovers on the
glass)
1.
Switch the power to the hob
off.
2.
Apply a cooktop cleaner
while the glass is still warm
(but not hot!)
3.
Rinse and wipe dry with a
clean cloth or paper towel.
4.
Switch the power to the
cooktop back on.
When the power to the hob is
switched off, there will be no “hot
surface” indication but the cooking
zone may still be hot! Take extreme
care.
Heavy-duty scourers, some nylon
scourers and harsh/abrasive
cleaning agents may scratch the
glass. Always read the label to check
if your cleaner or scourer is suitable.
Never leave cleaning residue on the
cooktop: the glass may become
stained.
Boilovers, melts,
and hot sugary spills
on the glass
Remove these immediately
with a fish slice, palette knife
or razor blade scraper suitable
for Induction glass cooktops,
but beware of hot cooking zone
surfaces:
1.
Switch the power to the
cooktop off at the wall.
2.
Hold the blade or utensil at a
30° angle and scrape the
soiling or spill to a cool area
of the cooktop.
3.
Clean the soiling or spill up
with a dish cloth or paper
towel.
4.
Follow steps 2 to 4 for
“Everyday soiling on glass”
above.
Remove stains left by melts and
sugary food or spillovers as soon as
possible. If left to cool on the glass,
they may be difficult to remove or
even permanently damage the glass
surface.
Cut hazard: when the safety cover is
retracted, the blade in a scraper is
razor-sharp. Use with extreme care
and always store safely and out of
reach of children.
Spillovers on the
touch controls
1.
hob the power to the
cooktop off.
2.
Soak up the spill
3.
Wipe the touch control area
with a clean damp sponge or
cloth.
4.
Wipe the area completely
dry with a paper towel.
5.
Switch the power to the
cooktop back on.
The hob may beep and turn itself
off, and the touch controls may not
function while there is liquid on
them. Make sure you wipe the touch
control area dry before turning the
hob back on.
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован