Просмотр инструкции кофемашины Siemens TI921309RW (EQ.9 s100), страница 33
Trouble shooting en
33
--------
The drip tray cannot be
removed.
The coffee grounds container is
very full.
The coffee grounds slider is
stuck.
Clean the interior of the brewing unit.
~ "Cleaning the appliance"
on page 26
Correctly insert the coffee grounds
slider.
The outlet system cannot be
assembled or disassembled.
Incorrect sequence Connect the outlet system (with milk
system) first, then connect the milk
container. Alternatively, on disassem-
bly first remove the milk container and
then the outlet system.
Display shows "Fill bean con-
tainer". Displayed although the
bean container )B is already
full, or the grinder is not grind-
ing any coffee beans.
Beans are not falling into the
grinding unit (beans too oily).
Gently tap the bean container.Possibly
change the type of coffee. When the
bean container is empty, wipe it with a
dry cloth.
Display shows: "Empty drip
tray" even if the drip tray is
empty - what to do?
Emptying is not detected when
the appliance is switched off.
When the appliance is switched on,
remove and re-insert the drip tray.
The drip tray is soiled. Clean the drip tray thoroughly.
Display shows "Refill with still
water" or "Remove filter"
Water tank wrongly inserted. Insert water tank correctly.
Carbonated water in the water
tank.
Fill the water tank with fresh tap water.
Float is stuck in the water tank. Remove the water tank and clean thor-
oughly.
New water filter not rinsed
according to the instructions.
Rinse the water filter according to the
instructions and then switch on.
Air in the water filter. Immerse the water filter in water until
no more air bubbles escape, then
insert the filter again.
Water filter is old. Insert a new water filter.
Very frequent display that des-
caling is necessary.
Water is too hard. Check whether the correct water hard-
ness is set in the menu. Insert water fil-
ter and activate according to the
instructions. ~ "Starting the "Water
filter"or "frost protection" programme"
on page 23
Problem Cause Solution
Display shows "Clean brewing
unit".
Brewing unit soiled. Clean the brewing unit.
Too much ground coffee in the
brewing unit.
Clean the brewing unit.Add no more
than 2 level measuring spoons of
ground coffee.
The brewing unit mechanism is
stiff.
Clean the brewing unit. ~ "Daily care
and cleaning" on page 25
If you are unable to solve the problem, always call the hotline.
You will find the telephone numbers at the back of these instructions
Ваш отзыв будет первым