Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции кофемашины Siemens TI905201RW (EQ.9 s500), страница 31

Siemens
Trouble shooting en
31
9. Place a container with a capacity of
at least 1.0 l under the outlet system
and confirm.
The programme runs.
Duration: approx. 19 minutes
Info: If there is not enough descaling
solution in the water tank, you will be
asked to: Refill with still water and
confirm.
10. Rinse out the water tank and (if
removed) re-insert the water filter.
11. Pour in fresh still water up to the
"max" marking and re-insert the
water tank.
The programme runs.
Duration: approx. 7 minutes
12. Empty the container and confirm.
13. Empty the drip tray and re-insert.
14. Empty, clean and re-connect the milk
container.
The programme has finished. The
appliance is ready for use again.
15. Press the $/± button to exit the
programme.
3 Trouble shooting
Trouble shooting
Faults often have simple explanations.
Before calling the customer service,
please refer to the fault table and
attempt to correct the fault yourself.
Please read through the safety
information at the beginning of these
instructions.
Fault table
Problem Cause Remedial action
Coffee or milk froth quality var-
ies considerably.
Build-up of limescale in the
appliance.
Descale the appliance in accordance
with the instructions.
No hot water dispensed. The milk system or the intake
of the milk system is soiled.
Clean the milk system or the intake.
~ "Cleaning the milk system"
on page 27
Too little or no milk froth. The milk system or the intake
of the milk system is soiled.
Clean the milk system or the intake.
~ "Cleaning the milk system"
on page 27
Unsuitable milk. Do not use milk that has already been
boiled. Use cold milk with a fat content
of at least 1.5%.
Build-up of limescale in the
appliance.
Descale the appliance as described in
the instructions.
No intake of milk is performed
by the milk system.
The milk system is incorrectly
assembled.
Correctly assemble all parts.
~ Fig. #
Incorrect connection sequence
for milk container and milk sys-
tem.
Connect the milk system to the outlet
system first, then connect the milk con-
tainer.
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован