Бесплатные инструкции на русском языке
  • Тип техники
  • Бренд

Просмотр инструкции кофемашины Siemens TI9553X1RW (EQ.9 plus connect s500), страница 36

Siemens
en Service programmes
36
Rinse milk system
The milk system is automatically
cleaned with a short jet of steam directly
after preparing a milk drink.
For particularly thorough cleaning, the
milk system can be additionally rinsed
with water.
Duration: approx. 2 minutes
1. Press the $/± button to open the
menu.
2. Use the rotary selector to select
"Rinse milk system".
3. Press the rotary selector to start the
programme.
4. Empty, clean and re-connect the milk
container.
5. Place an empty glass under the
outlet system and confirm.
The programme runs.
6. Empty, clean and re-connect the milk
container.
7. Empty the glass.
The programme has finished. The
appliance is ready for use again.
8. Press the $/± button to exit the
programme.
The milk system should also be subject
to thorough manual cleaning at regular
intervals. ~ "Cleaning the milk system"
on page 33
Descaling
Duration: approx. 21 minutes
The line at the bottom of the display
indicates in how many minutes the
water tank will need to be rinsed and
refilled with water, for example.
1. Press the $/± button to open the
menu.
2. Use the rotary selector to select
"Descale".
3. Press the rotary selector to start the
programme.
The instructions in the display guide you
through the programme.
4. Empty the drip tray and re-insert.
5. Empty, clean and re-connect the milk
container.
6. Remove the water filter (if present)
and confirm.
7. Fill the empty water tank with
lukewarm water up to the marking
"0.5 l". Dissolve 1 descaling tablet
in the water.
8. Place a container with a capacity of
at least 1.0 l under the outlet system
and confirm.
9. Press the rotary selector.
The programme runs.
Duration: approx. 19 minutes
Info: If there is not enough descaling
solution in the water tank, you will be
asked to: Refill with still water and
confirm.
10. Rinse out the water tank and (if
removed) re-insert the water filter.
11. Pour in fresh still water up to the
"max" marking and re-insert the
water tank.
The programme runs.
Duration: approx. 2 minutes
12. Empty the container and confirm.
13. Empty the drip tray and re-insert.
14. Empty, clean and re-connect the milk
container.
The programme has finished. The
appliance is ready for use again.
15. Press the $/± button to exit the
programme.
Cleaning
Duration: approx. 6 minutes
1. Press the $/± button to open the
menu.
2. Use the rotary selector to select
"Clean".
3. Press the rotary selector to start the
programme.
The instructions in the display guide you
through the programme.
4. Empty the drip tray and re-insert.
Ваш отзыв будет первым
Задайте вопрос
Ваше имя
E-mail
Вопрос*
Ваш вопрос будет опубликован после проверки
Ваш вопрос опубликован